It is an aftermarket accessory designed to reduce recoil and muzzle rise when firing the Glock 43 pistol. A compensator typically attaches to the muzzle of the pistol and redirects some of the escaping gases upward, which helps counteract the muzzle rise and recoil, allowing for faster and more accurate follow-up shots.
Features📚
The features of a compensator for Glock 43 can vary depending on the specific make and model. However, here are some common ones:
✳️ Muzzle Rise Reduction: The primary function of this device is to reduce muzzle rise, making it easier to control recoil and stay on target for faster follow-up shots.
✳️ Material: Compensators can be made from various materials, including aluminum, steel, or polymer. Materials can affect weight, durability, and performance.
✳️ Weight: They can add weight to the front of the pistol, which can help reduce recoil further. However, excessive weight may affect the balance and handling of the gun.
✳️ Venting/Porting: Many models have specific venting or porting patterns to direct escaping gases in a way that counteracts recoil. The design of these ports can vary.
✳️ Finish: The finish of the compensator can vary, including options like matte, polished, or coated finishes for durability and aesthetics.
Its innovative design, covered by a patent, features a compact 17-4 stainless steel ported baffle face that directs gas effectively. By significantly reducing recoil, this little device not only speeds up your shot-to-shot timing but also tightens your shot groupings. It does all of this while maintaining a minimal size and weight, ensuring that it won't create any noticeable bulges or weigh you down when carrying concealed. By adding it to your setup, you're investing in your defense. It's a reminder to stay vigilant, stay safe, and remember that accuracy matters above all else.
If you click this link and make a purchase, we earn a commission at no additional cost to you.
Benefits🔥
A compensator for Glock 43 can offer several benefits to the shooter, enhancing their overall shooting experience and improving their performance. Here are some of the potential advantages:
🟣 By mitigating recoil and muzzle flip, it helps the shooter maintain better control over the firearm, leading to more accurate and consistent shooting.
🟣 Reduced recoil and muzzle rise mean that you can get back on target more quickly after each shot. This is particularly beneficial in competitive shooting sports and self-defense situations where rapid, accurate shooting is crucial.
🟣 Such compensator can contribute to improved accuracy by minimizing the movement of the pistol during and after each shot, leading to tighter shot groups.
🟣 While the primary purpose is to improve shooting performance, some shooters suggest that it may help reduce wear and tear on the firearm over time by mitigating recoil forces.
Does it work on a pistol?📢
Compensators on pistols can be effective at reducing recoil and muzzle rise, but the extent to which they work depends on several factors, including the design of the compensator, the caliber of the ammunition being used, and the shooter’s skill level. Here’s a breakdown of their effectiveness:
☑️ These devices are designed to redirect some of the gases produced when a firearm is fired. By directing these gases upward, compensators counteract the natural tendency of the pistol’s muzzle to rise during recoil. This results in reduced muzzle rise, making it easier for the shooter to maintain target alignment and get back on target quickly for follow-up shots.
☑️ While comps are primarily intended to reduce muzzle rise, they can also have a secondary effect of reducing felt recoil. The redirected gases exert a downward force on the pistol, helping to counteract the backward recoil forces. This can make shooting more comfortable and allow for faster and more accurate follow-up shots.
📌 However, the degree of effectiveness depends on various factors, including the compensator’s design, ammunition used, shooter skill, and firearm characteristics. Shooters should carefully consider their specific needs and preferences when deciding whether to use a compensator and which one to choose.
Searching for a way to improve your target acquisition and reduce muzzle rise on your Glock 43? Look no further than the Tyrant Designs T-Comp compensator! This innovative two-piece design installs quickly and securely in seconds, without the need for set screws or any other attachment methods. The T-Comp compensator works with all Glock 43 models, including the 43x, and is compatible with all 1/2-28 threaded barrels. It also functions with almost any grain ammunition. So whether you want to improve your shooting performance or just want to add a little extra style to your gun, this compensator is the way to go!
Are you interested in a little extra power for your 9mm subcompact handgun? If so, consider Griffin Armament’s Micro Carry Comp 1/2×28. Using this product, our team found that this handy little accessory is made from 17-4 stainless steel and is compatible with popular models like the G43 G42 Sig P938 and P365 threaded barrels. It’s also got a black nitride finish that resists surface wear and corrosion, and it provides increased surface hardness. Plus, it decreases recoil, increases muzzle control, and provides fast follow-up shots! So why wait? Get your comp today!
Video review
Pros:
Reduces recoil
Increases muzzle control
Fast follow-up shots
Black nitride finish resists surface wear and corrosion
The Agency Arms 417C Glock 43 Compensator is a great way to improve the performance of your G43. It features a dual chamber design that helps to reduce muzzle rise and felt recoil, making it a great option for competitive shooters or anyone who wants to get the most out of their G43. The compensator is machined from 7075 aluminum and is MIL-A-8625 Type 3 hard anodized, so you can be confident in its durability and longevity. It’s designed to work with threaded barrels with 1/2×28 thread pitch and an overall barrel protrusion of 0.695″ +/- 0.005″ for optimal fitment and comes with a front sight hole that allows you to transfer your existing front sight from your slide to the compensator. Please note that the compensator may require tuning of the Recoil System. It’s designed to work with most factory-loaded ammunition but will yield the best results with heaver-charged ammunition.
Video review
Pros:
Dual chamber design helps to reduce muzzle rise and felt recoil
Machined from 7075 aluminum and hard anodized
Designed to work with threaded barrels with 1/2×28 thread pitch
The Agency Arms 417 Single Port Barrel Compensator is a must-have for any Glock 43 owner. Our research has shown that this high-quality compensator features a single chamber design with a single vertical venting port, making it extremely effective at reducing muzzle rise and felt recoil. It’s machined from 7075 aluminum for durability and is MIL-A-8625 Type 3 hard anodized for corrosion resistance. The 417C is also designed to work with most factory-loaded ammunition but will provide the best results when used with heaver-charged ammunition. For optimal fitment, the compensator requires a threaded barrel with 1/2×28 thread pitch and an overall barrel protrusion of 0.695in +/- 0.005in.
Pros:
Reduces muzzle rise and felt recoil
Machined from 7075 aluminum for durability
Designed to work with most factory-loaded ammunition
Who says you can’t have it all? The Sparc V2 Pistol Compensator from Arc Division gives you the perfect blend of style and function. This bad boy is machined from high-quality aluminum and features a unique square back design with double top ports. It’s the perfect way to add a little attitude to your pistol while also improving performance. Plus, it comes with everything you need for easy installation, including a thread locker, set screws, and an Allen key. So don’t wait any longer, pick up a Sparc V2 today!
Pros:
Machined from high-quality aluminum
Unique square back design with double top ports
Improves performance
Comes with everything you need for easy installation
The Arc Sparc is the first of the Arc Division line of compensators for handguns. The Sparc will help you shoot flatter and faster in all situations. As a result of using this product, we found that it is made from high-quality 7075 Aluminum and is available in the standard 1/228 and 13.5×1 LH for Glock factory threaded barrels and 9/16×24 for .40Cal. The Sparc is a great choice for anyone searching for a compensator that will help them shoot flatter and faster. Don’t wait – order it just now!
Pros:
It helps to dramatically reduce recoil and muzzle flips, making your shots more accurate and faster.
The design is also very aesthetically pleasing, and it makes your Glock 43 look even better.
Installation is quick and easy, and it doesn’t require any special tools or gunsmithing skills.
Cons:
It doesn’t work well with rounds that have a lot of energy, like magnum rounds.
Both ported barrels and thread-on compensators are designed to reduce recoil and muzzle rise, but they achieve this goal through different mechanisms, and their effectiveness can vary. Here’s a comparison of the two in terms of shooting characteristics:
🟦 Ported Barrel:
🟦 Thread-On Compensator:
🧩 How it Works: It has holes or vents cut into the top of the barrel near the muzzle. When the firearm is fired, some of the high-pressure gases are vented upward through these ports, exerting a downward force on the barrel, which counteracts muzzle rise and reduces recoil.
🧩 Recoil Reduction: These barrels can effectively reduce recoil and muzzle rise to a certain extent. The recoil reduction tends to be more noticeable with smaller calibers and lower-pressure rounds.
🧩 Soft Shooting: They can make a handgun feel softer to shoot because they reduce both recoil and muzzle flip. This can lead to improved accuracy and faster follow-up shots.
🧩 Permanent Modification: Ported barrels are typically integrated into the firearm and cannot be easily removed or changed.
🧩 How it Works: It is an aftermarket accessory that attaches to the threaded muzzle of the barrel. It redirects gases in various directions, typically upward, to counteract muzzle rise and reduce recoil.
🧩 Recoil Reduction: Such compensators are designed specifically to reduce recoil and muzzle rise. They can be very effective when properly designed.
🧩 Soft Shooting: Compensators, when well-designed and tuned, can make a handgun shoot very flat and soft. They are often used in competitive shooting sports for this reason.
🧩 Removable and Exchangeable: They can be removed and changed easily, allowing shooters to use different compensator designs or revert to a standard muzzle configuration when desired.
➡️ Which one shoots flatter or softer: In general, a well-designed thread-on compensator is likely to provide more significant recoil reduction and a flatter shooting experience compared to a ported barrel. Thread-on compensators are designed with the specific purpose of reducing recoil and muzzle rise, and they can be fine-tuned for optimal performance. This makes them a popular choice for competitive shooters and those searching for the softest shooting experience.
FAQ🤓
Do you need a threaded barrel for a compensator?
🧐 Yes, in most cases, you will need a threaded barrel on your firearm to attach a compensator. A threaded barrel has external threads at the muzzle end, which allow you to screw on or attach various muzzle devices, including compensators, muzzle brakes, suppressors, and other accessories.
✅ The compensator typically has internal threads that match the external threads on the barrel. By screwing the compensator onto the threaded barrel, it securely attaches to the firearm, ensuring that it functions as intended.
🟣 Here are some key points to consider:
🔶 Thread Pitch: It’s crucial to match the thread pitch of the compensator with that of the threaded barrel. Thread pitch refers to the distance between threads. Different firearms and manufacturers may use various thread pitches, so it’s important to ensure compatibility.
🔶 Firearm Models: Not all firearms come with threaded barrels by default. Threaded barrels are often available as aftermarket accessories for specific firearm models, especially those popular in the world of competition shooting or for those who want to customize their firearms.
🔶 Local Laws: Be aware of your local laws and regulations regarding threaded barrels and compensators. In some regions, there may be restrictions on threaded barrels or certain muzzle devices, so it’s essential to comply with applicable laws.
🔶 Installation: Properly attaching a compensator to a threaded barrel typically requires the use of a torque wrench or specialized tools to ensure a secure fit. If you’re unsure about installation, it’s advisable to seek the assistance of a qualified gunsmith.
💡 In summary, a threaded barrel is generally required to attach a compensator to a firearm. Ensure that the thread pitch matches, consider local regulations, and follow proper installation procedures to safely and effectively use a compensator on your firearm.
Do these devices improve accuracy?
✒️ Compensators can indirectly improve accuracy by helping shooters better manage recoil and muzzle rise. Here’s how they contribute to accuracy:
⭕ Reduced Muzzle Rise: The primary function of a compensator is to reduce muzzle rise by redirecting some of the escaping gases upward. When a firearm is fired, recoil forces can cause the front of the gun to rise, making it more challenging for the shooter to maintain a sight picture and accurate alignment with the target. A compensator counteracts this rise, allowing the shooter to stay on target more effectively.
⭕ Improved Recoil Control: They also reduce felt recoil by redirecting gases to counteract the backward force generated when the firearm is discharged. Less recoil means that the shooter experiences less physical disruption, making it easier to maintain control and accuracy during rapid-fire or follow-up shots.
⭕ Faster Follow-Up Shots: With reduced recoil and muzzle rise, shooters can transition quickly between shots and regain their sight picture faster. This enables faster follow-up shots and can lead to tighter shot groupings, which are indicative of improved accuracy.
📢 However, it’s important to note that while compensators can help improve accuracy, their impact may vary depending on several factors, including:
🔰 The shooter’s skill level: Skilled shooters who employ proper fundamentals of marksmanship may benefit more from compensators as they can take full advantage of reduced recoil and faster sight acquisition.
🔰 Firearm and ammunition: The effectiveness can vary depending on the firearm’s design, caliber, and the type of ammunition used. Higher-pressure ammunition typically benefits more from compensators.
🔰 Distance and shooting scenario: They may have a more noticeable effect on accuracy in scenarios that require rapid and repeated shots, such as competitive shooting or self-defense situations at close to moderate distances.
🔰 Compensator design: The effectiveness depends on its design and how well it’s matched to the firearm. Different compensators have varying degrees of efficiency in reducing recoil and muzzle rise.
😉 In summary, while compensators can enhance accuracy by mitigating recoil and muzzle rise, their impact is influenced by various factors. Shooters who prioritize fast follow-up shots, such as competitive shooters, may find compensators particularly beneficial for improving their overall accuracy and performance.
Do compensators make guns louder?
🤨 Compensators can make guns louder to some extent. The extent of the increase in noise depends on several factors, including the design of the compensator, the type of ammunition used, and the specific firearm. Here’s how they can affect the noise produced by a firearm:
💥 Redirected Gases: Compensators work by redirecting the high-pressure gases generated when a firearm is fired. These gases are typically expelled through the ports or baffles of the compensator to counteract recoil and muzzle rise. As the gases exit, they can create a louder report or muzzle blast compared to a firearm without a compensator.
💥 Ammunition Choice: The type of ammunition used can influence the noise level produced by a firearm. Some types of ammunition, especially those with higher-pressure loads, may result in a louder report when fired through a compensator.
💥 Design: The design of the compensator itself can impact noise levels. They with multiple ports or aggressive baffles may produce more noise as they direct gases more forcefully.
💥 Firearm Model: The specific firearm and its barrel length can affect the perceived noise level when using a compensator. Longer barrels generally offer better noise reduction compared to shorter barrels.
💥 Shooter Experience: A shooter’s perception of noise can also vary based on their experience and familiarity with firearms. What one shooter considers “loud” may not be the same for another.
❗ It’s important to note that while compensators may increase the noise level, the impact on noise is typically not extreme, especially when compared to other factors that contribute to firearm noise, such as the type of ammunition used. Shooters using compensators should always wear appropriate hearing protection to prevent hearing damage or discomfort.
Do I need a lighter spring with a comp?
✍️ Whether or not you need a lighter recoil spring with a compensator on your firearm depends on several factors, including the design of the compensator, the caliber of your firearm, the ammunition you’re using, and your specific shooting goals. Here are some considerations:
❇️ Compensator Design: Some models are designed to work optimally with the factory-standard recoil spring, while others may benefit from a lighter recoil spring. The design of the compensator and how it affects recoil and muzzle rise play a role in this.
❇️ Caliber: The caliber of your firearm can influence the choice of recoil spring. In general, compensators have a more noticeable impact on reducing recoil in higher-pressure calibers (e.g., 9mm, .40 S&W, .45 ACP) compared to lower-pressure calibers (e.g., .22 LR).
❇️ Ammunition: The specific ammunition you use can also affect whether a lighter recoil spring is necessary. Hotter or +P ammunition generates more recoil, and a lighter spring might help manage this recoil when combined with a compensator.
❇️ Shooting Goals: Your intended use of the firearm matters. If you’re a competitive shooter looking for fast follow-up shots and tight shot groupings, you might experiment with a lighter recoil spring to optimize the performance of your compensator. However, if your firearm is primarily for self-defense, you may prefer to stick with the factory recoil spring to ensure reliability.
❇️ Reliability: Lightening the recoil spring can sometimes affect the reliability of the firearm, especially if it’s not paired correctly with the compensator and ammunition. A too-light recoil spring can lead to issues like malfunctions or excessive wear and tear.
❇️ Experimentation: The best approach is often to experiment with different recoil spring weights to find the combination that works best for your specific setup and shooting style. Start with the factory recoil spring, and if you find that your compensator isn’t performing optimally or your recoil control isn’t where you want it to be, consider trying a lighter spring. Be sure to monitor the firearm’s reliability during this process.
❇️ Consult a Gunsmith: If you’re unsure about changing recoil springs or optimizing your compensator setup, it’s a good idea to consult with a qualified gunsmith. They can provide guidance and make recommendations based on your specific firearm and goals.
📌 In summary, the need for a lighter recoil spring with a compensator depends on several factors. It’s not a one-size-fits-all solution, and you should carefully consider your firearm, ammunition, and shooting goals when making this decision. Experimentation and professional advice can help you find the right combination for your specific setup.
What ammo is best for it?
🔰 The choice of ammunition for a firearm equipped with a compensator can vary depending on several factors, including the caliber of the firearm, the specific compensator design, and your shooting goals. Here are some considerations to help you select ammunition:
✴️ Higher-Pressure Ammunition: Compensators are generally more effective with higher-pressure ammunition because they rely on the gases generated by the firing of the round to function. Ammunition with +P (overpressure) or NATO-spec pressures tends to produce more gas, which can maximize the compensator’s performance.
✴️ Factory Ammo: Many shooters find that factory ammunition from reputable manufacturers works well with compensators. These manufacturers have developed their loads to perform reliably and consistently. Look for ammunition that matches your caliber and firearm specifications.
✴️ Match-Grade Ammo: If you’re a competitive shooter looking for the best accuracy and consistency, consider using match-grade ammunition. These rounds are often loaded with precision and are known for their consistency in velocity and accuracy.
✴️ Bullet Weight: The weight of the bullet can affect the recoil and performance of the compensator. Some shooters prefer heavier bullets as they generate more gas and can provide better compensation. Experimenting with different bullet weights within your caliber can help you find the right balance.
✴️ Ammunition Brand: Some compensators may work better with specific ammunition brands or loads due to the particular characteristics of the powder used in those loads. Experimentation may be necessary to find the best match for your compensator.
✴️ Reliability: Always prioritize ammunition that is reliable in your firearm. The reliability of your firearm is crucial, especially in self-defense or competition scenarios. Test any new ammunition thoroughly to ensure it functions flawlessly with your compensator-equipped firearm.
✴️ Shooting Goals: Consider your shooting goals. If you’re primarily focused on self-defense, prioritize reliable, high-quality defensive ammunition. If you’re a competitive shooter, you may need to balance recoil management with accuracy and speed.
✴️ Cost: High-performance ammunition, especially match-grade loads, can be more expensive. Be mindful of your budget and how much you’re willing to spend on ammunition for your compensator-equipped firearm.
Conclusion😊
Glock 43 compensators are a great way to improve your accuracy and control while shooting. In this article, we’ve outlined some of the best ones for Glock 43 on the market today. Whether you’re a first-time shooter or an experienced marksman, these tips will help you find the perfect device for your needs. Good shopping!🛒😉
Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!
About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.
Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.
I’ve been considering trying a compensator on my Glock 43, but I’m hesitant to invest in the upgrade without knowing if it’s worthwhile. If anyone has experience with this and could share their insights, I’d greatly appreciate it. Your input would be valuable in helping me make an informed decision.
I decided to try out the Griffin Armament Micro Carry Comp, and I have to say, I love it! I haven’t experienced any failures, and shooting it has become a more enjoyable experience for me than even with my Glock 19. It’s been a worthwhile upgrade in my opinion.
In my experience, I’ve used the Agency Arms 417C Glock 43 Compensator, and I’ve found it to be enjoyable. The added length is helpful for holster compatibility, especially if you’re already planning for a Glock 48-sized setup, and it adds some stability by preventing the pistol from tipping over the belt.
Nestor Martin
7 months ago
If anyone has recommendations for specific brands, or reliable reviews that could help me make an informed decision about which compensator to choose, I’d greatly appreciate your guidance.
I’ve been looking into the Tyrant Designs T-Comp Glock 43/43x/48 Compensator. I’ve been contemplating whether to go for a compensator instead of getting a slide and barrel. I used to have a Glock 43, and I liked it. If I opt for the compensator, I’d not only get reduced recoil but also added length, which might allow it to fit into holsters with the compensator installed.
Bonegazer
7 months ago
I’m considering the idea of compensating a Glock 43 and would like to hear both sides of the argument. On one hand, the shorter barrel and the gas escaping from the top could potentially dampen the snappy recoil, but I’m aware of the possible negatives like a significant fireball, unburned gunpowder, and reduced projectile velocity. For those who think it’s a good idea, could you please share your reasons? And for those who think it’s a bad idea, what are your concerns and arguments against it? I want to explore both perspectives and gather insights to help me make an informed decision. Please feel free to share your thoughts and experiences.
I spent a significant amount of time working at an indoor range that had rentals. I did notice that they were noticeably louder indoors, which is expected with compensated barrels. However, the muzzle flash wasn’t much of an issue for me. It seemed like most of the fire was burning above the sights, not in line with them, so it didn’t interfere with my shots, even in an indoor setting. In terms of recoil reduction, I agree that compensators like the Griffin Armament Micro Carry Comp may offer a significant reduction. But it is just my thoughts!
If you want to know about compensation, I try to explain both types: the first being a threaded extended barrel with a pressure chamber on the end, and the second involving just a couple of holes in the barrel and slide. For standard 9mm ammunition, the first type of compensation with a pressure chamber typically isn’t worth it. These types of setups are better suited for high-pressure rounds. Moreover, using such setups on self-defense guns can be a questionable choice. As for porting, the second type of compensation, it’s generally not recommended for self-defense firearms. The idea of having a fireball coming out the top can pose serious concerns, especially in close-quarters scenarios like shooting from retention. Additionally, porting is only marginally effective in significantly reducing recoil, and it’s not commonly seen on competition pistols for good reasons.
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
I’ve been considering trying a compensator on my Glock 43, but I’m hesitant to invest in the upgrade without knowing if it’s worthwhile. If anyone has experience with this and could share their insights, I’d greatly appreciate it. Your input would be valuable in helping me make an informed decision.
I decided to try out the Griffin Armament Micro Carry Comp, and I have to say, I love it! I haven’t experienced any failures, and shooting it has become a more enjoyable experience for me than even with my Glock 19. It’s been a worthwhile upgrade in my opinion.
In my experience, I’ve used the Agency Arms 417C Glock 43 Compensator, and I’ve found it to be enjoyable. The added length is helpful for holster compatibility, especially if you’re already planning for a Glock 48-sized setup, and it adds some stability by preventing the pistol from tipping over the belt.
If anyone has recommendations for specific brands, or reliable reviews that could help me make an informed decision about which compensator to choose, I’d greatly appreciate your guidance.
I’d recommend checking out the Division Sparc V2 Pistol Compensator; I’ve found it to work well on my Glock. Maybe it also is suitable for your needs.
I’ve been looking into the Tyrant Designs T-Comp Glock 43/43x/48 Compensator. I’ve been contemplating whether to go for a compensator instead of getting a slide and barrel. I used to have a Glock 43, and I liked it. If I opt for the compensator, I’d not only get reduced recoil but also added length, which might allow it to fit into holsters with the compensator installed.
I’m considering the idea of compensating a Glock 43 and would like to hear both sides of the argument. On one hand, the shorter barrel and the gas escaping from the top could potentially dampen the snappy recoil, but I’m aware of the possible negatives like a significant fireball, unburned gunpowder, and reduced projectile velocity. For those who think it’s a good idea, could you please share your reasons? And for those who think it’s a bad idea, what are your concerns and arguments against it? I want to explore both perspectives and gather insights to help me make an informed decision. Please feel free to share your thoughts and experiences.
I spent a significant amount of time working at an indoor range that had rentals. I did notice that they were noticeably louder indoors, which is expected with compensated barrels. However, the muzzle flash wasn’t much of an issue for me. It seemed like most of the fire was burning above the sights, not in line with them, so it didn’t interfere with my shots, even in an indoor setting. In terms of recoil reduction, I agree that compensators like the Griffin Armament Micro Carry Comp may offer a significant reduction. But it is just my thoughts!
If you want to know about compensation, I try to explain both types: the first being a threaded extended barrel with a pressure chamber on the end, and the second involving just a couple of holes in the barrel and slide. For standard 9mm ammunition, the first type of compensation with a pressure chamber typically isn’t worth it. These types of setups are better suited for high-pressure rounds. Moreover, using such setups on self-defense guns can be a questionable choice. As for porting, the second type of compensation, it’s generally not recommended for self-defense firearms. The idea of having a fireball coming out the top can pose serious concerns, especially in close-quarters scenarios like shooting from retention. Additionally, porting is only marginally effective in significantly reducing recoil, and it’s not commonly seen on competition pistols for good reasons.