• Reading time:28 mins read
  • Post category:Compensators / Glock
  • Post last modified:April 6, 2024
  • Post published:November 17, 2022


What is a Glock 26 compensator?🧐

It is a device attached to the muzzle (the front end) of a firearm to help reduce recoil and muzzle rise. It achieves this by redirecting some of the gases generated by the fired cartridge to counteract the upward movement of the firearm during firing.

Glock 26 compensator


A compensator for a Glock 26, or any other firearm, is a muzzle device that can help improve shooting performance and make it easier to control, especially when firing rapidly. Here are some common features:

✅ Compensators work by redirecting some of the high-pressure gases generated during firing to counteract the recoil of the pistol. This results in less felt recoil, making it easier to stay on target and recover quickly between shots.

✅ One of the primary advantages is its ability to reduce muzzle rise. When the gun fires, the compensator directs gases upward, which helps keep the front of the pistol down, allowing for faster follow-up shots and improved accuracy.

✅ A compensator can enhance the shooter’s overall control of the Glock 26, especially during rapid or multiple shots. This is particularly useful for competitive shooting or defensive scenarios where quick and accurate follow-up shots are crucial.

Our Top Pick
Griffin Armament Micro Carry Comp
It was designed with concealed carry enthusiasts in mind, aiming to enhance recoil control and muzzle management without adding excessive bulk or weight. It's a compact solution that extends just a bit beyond a standard thread protector, making it inconspicuous and practical. This innovative compensator features a unique design with precise 17-4 stainless steel porting that effectively redirects gas and minimizes recoil. This reduction in recoil translates to faster follow-up shots and tighter shot groupings, improving overall shooting performance. What's particularly impressive is that this comp achieves all of this without significantly altering the firearm's dimensions or adding unnecessary weight. It's a practical addition that won't compromise your concealed carry setup or burden you with extra heft.
Buy Now On OpticsPlanet
If you click this link and make a purchase, we earn a commission at no additional cost to you.


Installing a compensator on a Glock 26 can offer several benefits, especially for those who want to improve their shooting performance or customize their firearm. Here are some of the key advantages:

💥 Improved Accuracy: With reduced recoil and muzzle rise, shooters can maintain a more stable and consistent sight picture. This can lead to improved accuracy, making it easier to place shots precisely where they are intended.

💥 Customization: Compensators come in various styles, finishes, and designs. Adding one to your Glock 26 can provide a personalized and unique look to your firearm.

💥 Tactical Advantage: In self-defense situations, a compensator can help you maintain control of your Glock 26, allowing for quicker and more accurate follow-up shots if needed.

Benefits of Glock 26 compensator

Do pistol comps work?💡

😉 Yes, pistol compensators, often referred to as “comps”, can be effective at reducing recoil and muzzle rise in handguns. They work by redirecting some of the high-pressure gases generated when a round is fired to counteract the upward movement of the pistol’s muzzle. Here’s how they work and their effectiveness:

🎯 When a bullet is fired, hot gases rapidly exit the barrel. A compensator is designed with specially shaped ports or channels that divert a portion of these gases upward. This upward force counters the natural tendency of the handgun to rise during recoil.
🎯 By reducing the rearward recoil force and redirecting gases upward, a compensator can make the handgun more controllable. Shooters often experience less perceived recoil and muzzle flip, allowing them to stay on target more easily.
🎯 Improved control over the pistol’s muzzle can lead to faster and more accurate follow-up shots, which is particularly valuable in competitive shooting and self-defense situations.
🎯 The reduced muzzle flip and better control provided by a compensator can lead to improved accuracy. Shooters can maintain a consistent sight picture and target alignment, resulting in more precise shot placement.

Best Glock 26 Compensator Reviews

1# ZEV Technologies PRO Glock V2 Compensator

ZEV Technologies PRO Glock V2 Compensator

View on OpticsPlanet View on Brownells

If you’re serious about marksmanship and want to take your shooting skills to the next level, then you need the ZEV Technologies PRO Glock V2 Compensator. Based on our experience this top-of-the-line compensator is designed to greatly reduce recoil and muzzle rise, keeping your shots on target with every pull of the trigger. The contoured porting, enlarged guide rod channel, and secure mounting system make this compensator a step up from previous generations, and it’s optimized for high performance on the G19 model. But regardless of which 9mm Glock model you have, this compensator will provide a significant improvement in accuracy. So don’t settle for anything less than the best – get this comp and take your shooting to a whole new level.

  • Reduces muzzle rise and felt recoil
  • Contoured porting
  • Enlarged guide rod channel
  • Install is not so simple


2# Primary Machine Glock 9mm Stealth Compensator

Primary Machine Glock 9mm Stealth Compensator

View on OpticsPlanet View on Brownells

The Primary Machine Glock 9mm Stealth Compensator is a high-quality muzzle brake and compensator that is designed to provide you with years of reliable performance. This product is made using only the best materials and craftsmanship, so you can be sure that it will last for a long time. Additionally, this compensator is easy to install and use, making it a great choice for nearly any shooter. Don’t miss the opportunity to get an excellent performance – order it just now!

Video review

  • Lightweight
  • Nice fit
  • Will work with OEM recoil springs
  • Set screws could be better


3# Griffin Armament Micro Carry Comp

Griffin Armament Micro Carry Comp 1/2x28

View on OpticsPlanet View on Brownells

At Griffin Armament, we know that your carry piece is important to you. You need a product that is going to add value and performance without adding unnecessary weight or bulk. That’s why we designed the Micro Carry Comp (MC). Our research has shown that this patent pending design is only a few tenths of an inch longer than a typical thread protector, but it packs a punch with its close-dimensioned 17-4SS ported baffle face. It significantly reduces recoil, increases split times between shots, and decreases group sizes. Its minimal size and weight make it ideal for concealed carry, and its wrench flats provide an easy gripping surface for torquing the device into place. So don’t wait any longer, pick up such comp today!

Video review

  • Super lightweight
  • Reasonably priced
  • Great quality product
  • Better follow-up shots
  • Loud
  • Bad for low light condition


4# Arms Republic Pistol Compensator

Arms Republic Pistol Compensator

View on OpticsPlanet

The Arms Republic Pistol Compensator is a great option for someone looking for a top-quality compensator that doesn’t have side ports. This product is perfect for use on something like a Flux Raider and comes with everything needed to mount it. It is made from high-quality 6061 T6 aluminum and has a sleek, anodized finish. This product also has 1/2×28 threads per inch and a weight of only 0.25 ounces. The contoured lines on this compensator perfectly match Glock’s slide design. This quality-made pistol compensator is an awesome choice for your needs!

  • Effective in reducing muzzle rise
  • Fast and accurate follow-up shots
  • Excellent craftsmanship
  • Competitive price
  • Could potentially increase muzzle flash


5#  Trybe Defense Universal Single Port 9mm Compensator

TRYBE Defense Universal Single Port 9mm Compensator

View on OpticsPlanet

The Trybe Defense Universal Single Port 9mm Compensator is a must-have for any gun enthusiast. This compensator dramatically reduces muzzle rise and sensed recoil, allowing for lightning-fast target re-acquisition. Based on our observations requiring zero modification to your 9mm firearm and compatible with almost any grain of ammunition, it maintains a minimal profile to aid against printing for concealed carriers while also greatly improving your accuracy in the field. Compact and full-sized models weighing in between 0.70oz. – 1.00oz., boasting an ultra-sleek profile, and built from durable and long-lasting 7075 aluminum fits beautifully on any brand of 9mm firearm that you choose to optimize!

  • Compatible with almost any grain of ammunition
  • Maintains a minimal profile to aid against printing for concealed carriers
  • Greatly improves accuracy in the field
  • Ultra-sleek profile
  • Durable 7075 aluminum construction
  • High price tag


What mounting techniques are for you?🛠️

💡 The choice of a mounting technique for your handgun largely depends on your specific firearm, preferences, intended use, and local regulations. There are several common methods for mounting compensators to handguns:

📢 Threaded Barrel: Many compensators are designed to be mounted on a threaded barrel. This is a popular method and is commonly used on handguns equipped with threaded barrels. To use this method, you’ll need a threaded barrel that matches the threading of the compensator. Simply screw the compensator onto the threaded barrel, and it’s ready to use.
📢 Dovetail Mounting: Some compensators are designed to fit into a dovetail or similar slot on the handgun’s frame or slide. This method doesn’t require a threaded barrel but may necessitate a modification to your handgun’s slide. It’s essential to have a gunsmith or a knowledgeable individual install to ensure proper fit and alignment.
📢 Clamp-On Compensators:  Clamp-on compensators are designed to attach directly to the front of the barrel, usually without requiring any permanent modifications. They use screws or clamps to secure the compensator in place. This method is relatively easy to install and remove and is less likely to affect your firearm’s resale value.
📢 Integral Compensators: Some handguns come with integral compensators, meaning the compensator is built directly into the barrel or slide. This design provides a sleek and integrated appearance but may limit your customization options. Integral compensators are usually found on specialized competition or custom-built firearms.
📢 Frame-Mounted Compensators:  In some cases, compensators can be mounted to the frame or lower receiver of the handgun. These are less common and may require specific frame modifications. Frame-mounted compensators can offer excellent performance but are generally reserved for competition or custom-built firearms.

😎 Ultimately, the right mounting technique for you will depend on your specific circumstances and preferences. If you’re unsure or have any doubts, it’s advisable to consult with a qualified gunsmith or firearm expert to ensure safe and proper installation.


Should you use it on an EDC pistol?

✍️ The decision to use a compensator on your everyday carry (EDC) pistol is a matter of personal preference and should be made with careful consideration of various factors. Here are some key points to weigh when deciding whether to use a compensator on your EDC pistol:

🔷 Recoil Reduction: Compensators are designed to reduce recoil and muzzle rise, which can aid in quicker follow-up shots and improved control during rapid firing. If you are confident that reduced recoil will benefit your shooting performance in a self-defense scenario, a compensator may be a valuable addition.
🔷 Concealability: One of the primary concerns with EDC is maintaining concealability. Compensators typically add length to the barrel, potentially making it more challenging to conceal your pistol. You should consider whether the additional length and possible printing (visible outline of the firearm through clothing) are acceptable in your everyday attire.
🔷 Holster Compatibility: The presence of a compensator can affect the fit and draw from your holster. Ensure that your holster is compatible with your EDC pistol equipped with a compensator. Some holsters are designed to accommodate compensators, while others may not.
🔷 Training and Familiarity: If you choose to use a compensator on your pistol, it’s essential to train and practice extensively with it. You should be entirely comfortable with your setup and any changes in recoil management that the compensator introduces.
🔷 Legal Considerations: Be aware of local, state, and federal laws and regulations governing firearm modifications. Some areas may have restrictions on the use of compensators or specific features on firearms.
🔷 Reliability: Any modification to your EDC pistol can potentially affect its reliability. Ensure that the compensator you choose is reliable and does not introduce malfunctions or reliability issues.
🔷 Purpose: Consider the intended purpose of your pistol. If it’s primarily for self-defense and personal protection, your priority should be reliability and ease of concealment. Compensators may be more suitable for competition or range firearms.

👍 In summary, whether to use a compensator on your EDC pistol is a personal decision influenced by your shooting skills, preferences, local laws, and the specific context in which you plan to use the firearm. It’s crucial to strike a balance between improving performance and maintaining the practicality and reliability of your EDC setup.

📺 More information in this video:

Is a compensator loud?

🤨 Yes, compensators on firearms can contribute to increased noise levels when shooting. Compensators work by redirecting some of the high-pressure gases produced during firing to reduce recoil and muzzle rise. This redirection of gases can result in a louder and more pronounced muzzle blast compared to a firearm without a compensator.

🛟 Several factors contribute to the increased noise associated with compensators:

  • 💠 Gas Diversion: Compensators have ports or vents that direct gases upward or to the sides. As these gases exit the ports, they create a loud and distinct noise, often described as a sharp crack or pop.
  • 💠 Ammunition Choice: The type of ammunition used can influence the noise level. Higher-pressure or supersonic ammunition tends to produce louder muzzle blasts, and this effect can be more pronounced with a compensator.
  • 💠 Barrel Length: The length of the firearm’s barrel can also affect the noise level. Shorter barrels tend to produce louder muzzle blasts, and when combined with a compensator, the noise may be more noticeable.
  • 💠 Environmental Factors: The noise produced by a compensator can be more or less noticeable depending on the shooting environment. In an open outdoor range, the noise may dissipate more quickly. In confined spaces or indoor ranges, the noise can be more intense and reverberate, making it seem louder.

❗ In summary, compensators can make firearms louder due to the redirection of gases and the design of the device. Shooters should always prioritize hearing protection when using firearms equipped with compensators or when shooting in environments where noise levels may be elevated.

Do these devices reduce velocity?

⌛️ Pistol compensators can potentially reduce the velocity of the bullets fired from the handgun, but the extent of this reduction is typically minimal and may not be significant for most practical purposes. Here’s why compensators can affect velocity and the factors involved:

🔰 Compensators work by redirecting some of the high-pressure gases produced when a round is fired. These gases are expelled through ports or vents in the compensator, which helps reduce recoil and muzzle rise. However, the redirection of gases can also have a minor effect on bullet velocity.
🔰 The design of the compensator, the size and shape of the ports or vents, and the placement of these features can influence the extent to which bullet velocity is affected. Some compensators are designed to minimize the impact on velocity, while others may have a more noticeable effect.
🔰 The type and load of ammunition used can also play a role. Heavier bullets and hotter loads may experience slightly greater velocity reductions when used with a compensator.
🔰 The length of the handgun’s barrel can affect bullet velocity. In some cases, the compensator may slightly extend the overall length of the barrel, which can impact velocity. However, the impact is generally minimal.

🤠 In summary, while pistol compensators can potentially reduce bullet velocity to some degree due to the redirection of gases, this reduction is typically small and often not a major concern for most shooters. The primary purpose of a compensator is to improve recoil control and muzzle management, and any effect on velocity is generally considered a trade-off for enhanced shooting performance.

What is the difference between a ported barrel and a compensator?

📚 Ported barrels and compensators are both firearm accessories designed to reduce recoil and muzzle rise, but they achieve this goal through different mechanisms and have distinct characteristics. Here are the key differences between a ported barrel and a compensator:

🔶 Ported Barrel: 🔶 Compensator:
🟣 Recoil Reduction Mechanism: A ported barrel has specially designed vents or ports cut into the barrel itself. When the firearm is fired, these vents allow some of the high-pressure gases generated by the ignited cartridge to escape upward, which counters the recoil and muzzle rise. Ported barrels reduce recoil primarily through the venting of gases within the barrel. A compensator, on the other hand, is a separate muzzle device attached to the end of the barrel. It works by redirecting the high-pressure gases that exit the muzzle when a round is fired. These gases are directed in a specific pattern, typically upward, to counteract the muzzle rise and recoil. Compensators reduce recoil by controlling the direction of expelled gases.
🟣 Design and Attachment: Porting is integrated into the barrel itself during the manufacturing process. It cannot be easily added or removed without replacing the entire barrel. Porting typically consists of small holes or slots along the top of the barrel. A compensator is a separate, threaded device that can be attached to the muzzle of a firearm with a threaded barrel. It can be easily added or removed, making it a more versatile option for those who want to switch between a compensator and a standard muzzle device.
🟣 Muzzle Blast and Noise: Ported barrels can increase the muzzle blast and noise due to the venting of gases within the barrel. The shooter may experience a louder report compared to a non-ported barrel. Compensators can also result in a louder muzzle blast and noise when gases are redirected forcefully. The noise may be more pronounced compared to a standard, non-compensated firearm.
🟣 Aesthetics and Customization: The porting on a barrel is a permanent feature and cannot be customized or changed without replacing the barrel. Compensators come in various designs and can be chosen based on aesthetic preferences or specific shooting needs. Shooters can easily swap compensators for different purposes or appearances.
🟣 Effect on Velocity: Ported barrels typically have a minimal effect on bullet velocity because they vent gases within the barrel, which has limited impact on the bullet’s path. Compensators may also have a minor effect on bullet velocity because they redirect gases after the bullet exits the barrel. However, this effect is generally minimal and not a significant concern for most shooters.

🤓 In summary, both ported barrels and compensators serve to reduce recoil and muzzle rise, but they do so through different mechanisms and have varying degrees of impact on muzzle blast, noise, and customization options. The choice between the two depends on the shooter’s preferences and specific firearm needs.

📺 More information in this video:

Do you need a threaded barrel for a compensator?

😉 Yes, you typically need a threaded barrel on your firearm to attach a compensator. A threaded barrel has external threads at the muzzle end, allowing you to screw on various muzzle devices, including compensators, flash suppressors, muzzle brakes, or suppressors (silencers).

✏️ Here are a few key points to consider:

❇️ Thread Pitch: Threaded barrels come in different thread pitches or patterns, depending on the firearm and the specific model. It’s crucial to ensure that the compensator you choose has matching threads to screw onto the barrel correctly.
❇️ Compatibility: Compensators are designed for specific firearm models or barrel configurations. You should ensure that the compensator you select is compatible with your firearm’s make and model, as well as the thread pitch on your barrel.
❇️ Installation: Proper installation of a threaded compensator typically requires a specific wrench or tool to securely attach it to the barrel. It’s advisable to have a gunsmith or someone with experience install to ensure it’s done correctly.
❇️ Legal Considerations:  Be aware of local, state, and federal laws and regulations regarding threaded barrels and compensators. In some regions, there may be restrictions on threaded barrels or specific muzzle devices.

🧑‍🔧 If your firearm does not have a threaded barrel but you wish to use a compensator, you may explore options such as barrel replacement or customization services offered by firearm manufacturers or gunsmiths. Keep in mind that altering your firearm may impact its warranty and legal status, so it’s important to research and follow all applicable laws and regulations when making modifications.


When it comes to Glock 26 compensators, there are a lot of choices on the market. In this article, we’ve tried to provide an overview of the different types of compensators available and some of the pros and cons of each type. We hope that this information will help you make an informed decision when purchasing your compensator. Good luck!🤠👍

Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!

About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.

Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.

0 0 votes
Article Rating
Notify of
Oldest Most Voted
Inline Feedbacks
View all comments
Gannon Walker
Gannon Walker
6 months ago

I’m looking for recommendations on a compensator for my Glock 26 Gen 5, which already has a SilencerCo threaded barrel installed. I’m relatively new to gun modifications, so I’m wondering if I’ll need to make any changes to the recoil spring when adding a compensator.

    6 months ago
    Reply to  Gannon Walker

    🔥 When adding a compensator to a firearm, you may need to make some adjustments to the recoil spring, but it largely depends on the specific firearm, the compensator design, and your ammunition choice. Here are some general considerations:
    🔷 Compensator Design: The type and design of the compensator can influence how it affects recoil. Some compensators redirect gases upward to reduce muzzle rise, while others redirect them to the sides to reduce felt recoil. The specific compensator you choose may have different effects on the firearm’s recoil impulse.
    🔷 Ammunition: The type of ammunition you use can also impact recoil. Different loads and bullet weights can result in varying levels of recoil energy. If you switch between different types of ammunition, you may need to adjust the compensator and recoil spring accordingly.
    🔷 Recoil Spring Weight: In some cases, adding a compensator to a firearm can change the recoil dynamics. For instance, if the compensator reduces muzzle rise significantly, it may cause the firearm to cycle differently. In such cases, you might need to experiment with different recoil spring weights to ensure reliable cycling.
    🔷 Testing and Fine-Tuning: It’s essential to test your modified firearm thoroughly at the range after adding a compensator. Pay attention to reliability, accuracy, and any cycling issues. If you experience problems like failures to feed, eject, or chamber rounds, you may need to adjust the recoil spring or consider other modifications.
    🧑‍🔧 In summary, the need for changes to the recoil spring when adding a compensator varies depending on several factors. It’s crucial to approach any modifications with safety in mind, follow manufacturer recommendations, and be prepared to test and fine-tune your firearm to ensure reliable and safe operation.

      6 months ago
      Reply to  Gannon Walker

      I’ve come across a Griffin Armament Micro Carry Comp that appears to perform effectively, especially when used with +P ammunition. It is an excellent choice!

        Malcolm Thompson
        Malcolm Thompson
        6 months ago

        What Glock compensators do you use?

          6 months ago

          I’ve had excellent experiences with ZEV Technologies PRO Glock V2 Compensator. It is relatively easy to install and provides a secure fit, especially on my ZEV barrel. It’s interesting how opinions on compensators can vary; some people appreciate their advantages, while others may have different preferences when it comes to firearms accessories.

            Armani King
            Armani King
            6 months ago

            The new Arms Republic Pistol Compensator is impressive. It is very lightweight and anodized finish. So it awesome fits my Glock 26 and gives a sleek black design.

              6 months ago

              My main question is whether anyone knows of any Glock 26 barrels with built-in compensators that comply with the threaded barrel guidelines in New York State. I’m open to suggestions as well and would appreciate any insights or recommendations that are also compliant with New York State regulations.

                Quantrell Lee
                Quantrell Lee
                6 months ago
                Reply to  Whitbottom

                There are several options to consider. Some aftermarket parts manufacturers offer ported barrels that extend beyond the slide, which doesn’t reduce the stock velocity or necessitate slide cuts. Additionally, you can experiment with different bullet weights; for example, 115 grains can be snappy, while 147 grains can feel pushy, so I find 124 grains to strike a good balance between the two. Working on your grip can also make a difference, and you can explore adding a magazine extender with a pinky rest or applying different grips to see if they improve your shooting experience.

                  6 months ago

                  Lately, I’ve been considering the idea of installing a compensator, but I’m uncertain about the advantages it would bring. Thank you for your input.

                    6 months ago
                    Reply to  Carloman

                    ✍️ Installing a compensator on your firearm can offer several advantages, but it’s essential to understand these benefits in the context of your specific shooting needs and preferences. Here are some advantages of adding a compensator:
                    Recoil Reduction: Compensators are designed to redirect gases expelled from the muzzle upward or to the sides, which helps counteract muzzle rise and reduce felt recoil. This can make it easier to stay on target for follow-up shots and improve overall shooting comfort, especially with high-recoil firearms.
                    Improved Control: Reduced muzzle rise means that you can maintain better control over your firearm during rapid fire or when shooting multiple rounds quickly. This is particularly valuable in competitive shooting sports or defensive shooting situations.
                    Faster Target Reacquisition: With less muzzle movement, you can acquire your target more quickly after each shot, leading to improved accuracy and faster shooting times, especially in dynamic shooting scenarios.
                    Enhanced Accuracy: The reduction in muzzle movement and recoil can lead to improved accuracy, as it minimizes the disturbance to your sight picture. This is particularly beneficial for precision shooting.
                    Customization: Compensators come in various designs, and you can choose one that suits your firearm and your specific needs. Some compensators are more effective at reducing recoil, while others focus on reducing muzzle rise or a combination of both.
                    Aesthetics: Some shooters appreciate the visual appeal of a well-designed compensator, and it can give your firearm a unique look.
                    Competition Performance: Compensators are commonly used in competitive shooting sports, such as IPSC and USPSA, where speed and accuracy are crucial. They can give you a competitive edge by allowing faster follow-up shots.
                    🧑‍🔧 In conclusion, a compensator can be a valuable addition to your firearm, especially if you engage in competitive shooting or want to improve recoil control and accuracy. Before making any modifications, consult with experienced shooters or gunsmiths who can provide guidance based on your specific needs and firearm platform.

                      Xan Gonzales
                      Xan Gonzales
                      6 months ago
                      Reply to  Carloman

                      I’ve decided to go for it, and I’ve been using a Primary Machine Glock 9mm Stealth Compensator. It has made a noticeable difference in taming recoil, especially when using 124-grain self-defense rounds.

                        6 months ago
                        Reply to  Carloman

                        I’ve recently delved into compensators, and I’ve learned a few things along the way. When you add a compensator, you often need to swap out the recoil springs and sometimes the striker springs as well. Compensators work by diverting gas to reduce recoil. The stock recoil spring usually comes in at 17 pounds. Depending on factors like the pressure of your ammunition and the specific compensator you’re using, you might find it necessary to switch to an 11-pound spring. In such cases, you’d also want to adjust the striker spring accordingly.