• Reading time:20 mins read
  • Post category:Ruger / Sights
  • Post last modified:April 6, 2024
  • Post published:February 2, 2021

If you are not obsessed with the stock sights and scopes on the heavy barreled rifles, or you find shooting from such firearms dull, you should try classic battle sights, someone combines it with a bull barrel adapter.

Best Ruger 10/22 Sight - Editor's Choice

The clear sight images will allow you to improve accuracy results.

Why do we need a Ruger 10/22 sight?

Among firearms accessories sighting systems occupy important places. Due to reliable sights, grouping can be reduced by half (from 25 to 100 meters), it always returns to zero after takedown. Ruger sight was designed to replace the standard rifle beads to provide faster target acquisition and higher visibility.

Ruger 10/22 Sights Review| Best Ruger 10/22 Sight

ImageProductBrand
Williams Gun Sight Ace In The Hole For Ruger 10/22WilliamsBUY
Ruger 10/22 Fiber Optic Front/Rear SightRugerBUY
Williams Gun Sight Ruger 10/22 WGRS Fire SightWilliamsBUY
Ruger LaserMax Laser Sight for Ruger 10/22RugerBUY
Nodak Spud LLC RUGER 10/22 Adjustable Front SightNodak Spud LLCBUY
Hiviz Litewave Sight for Ruger 10/22HivizBUY
TruGlo Ruger 10/22 Rifle SightTruGloBUY
Tandemkross Shadow Sight Mount Ruger 10/22TandemkrossBUY
Ruger 10/22 Standard Open Rear SightRugerBUY
KNS Precision Ruger 10/22 .425 Iron Gun SightsKNS PrecisionBUY
XS Sight Systems - Ruger Mini-30 Rear SightXS Sight SystemsBUY
Tech Sights - Ruger 10/22 TSR200TechBUY
BUY

#1 Williams Ruger 10/22 Sights (Ace In The Hole)

Williams Gun Sight Ace In The Hole For Ruger 10/22

Williams Gun is specialized on different rifle parts. The Ace In The Hole sight is designed to operate on the Ruger 10/22 takedown. The Williams sight is manufactured of CNC machined high-grade aluminum, covered with a standard black finish. This sight consists of a Picatinny scope rail that can be used as an integral back-up aperture sight.

Pros:
  • Fits perfectly on take-down;
  • Replaceable apertures and ghost rings;
  • Crisp sight picture;
  • Regulable for elevation and windage;
  • The rear sight doesn’t interfere with any scopes;
  • The rear sight adjustment helps get the sights zero in.
Cons:
  • No stainless version.

#2 Ruger 10/22 Fiber Optic Front/Rear Sight

Ruger 10/22 Fiber Optic Front/Rear Sight

Front and rear sight, compatible with Caliber.22LR is more efficient than factory iron sights, but they cannot replace peep style sights. This Fiber Optic Sight is suitable for fast sight acquisition, close range, but not for accurate shooting without modification. The rear sight does not extend over the rifle connection point, it is shorter mostly than rear sights with other similar designs. The rear sight is equipped with dovetailed, mounted by a set screw. Windage should be adjusted by loosening and moving the sight. Elevation is regulated as well by the screw, which needs to be driven into the barrel and pushes the sight up or down. The ambient light is collected and projected by bright three-dot sights. Rear green dots are brighter and easier to see than a front red dot, but still, it is more visible than standard brass dot front sight, coming on standard 10/22 rifles.

Pros:
  • Clear Aluminum fiber optic sight set;
  • Sturdy and dependable components;
  • Highly visible front sight;
  • Easy DIY upgrade;
  • Simple elevation and windage adjustments;
  • Rear bright green dots and red front one.
Cons:
  • The rear notch is large enough (twice bigger than the stock sight) and can cause worse accuracy.

#3 Williams Gun Sight Ruger 10/22 WGRS Fire Sights

Williams Gun Sight Ruger 10/22 WGRS Fire Sight

The Williams sight set with a good-visible red fiber optic is very accurate with the rear peep sight. The Front Sight Color is red and Rear Sight Color is black. The peep sight is made from a strong aluminum alloy, and installed with existing screws on the receiver top or dovetail is used. After installing the rear sight, it is necessary to secure the screws with lock tight. After zero, the position of elevation and windage should be noted, and secure each position with lock tight. This sight set fits Ruger 10/22, 1400 Slug Hunter, Slug Hunter, Winchester 1300.

Pros:
  • Easy to install;
  • Positive Elevation and Windage Locks;
  • Lightweight;
  • Rustproof;
  • Fits perfectly;
  • Compact low profile of this sight compared to others.
Cons:
  • Adjustment of elevation and windage is a bit inconvenient as the screws are very small;
  • Fragile: front fiber optic sight is not durable.

#4 Ruger LaserMax Laser Sight for Ruger 10/22

Ruger LaserMax Laser Sight for Ruger 10/22

LaserMax developed Laser Sight to flawlessly integrate on the Ruger 10/22 to enhance shooting precision, regardless of the shooter’s skill level. The Laser Weapon Sight should be mounted on a Ruger 10/22 takedown by swapping out the present barrel band. The Ruger Sight with five laser outputs has red beam color. This sight is coated with a black finish, equipped with two built-in Picatinny rails for other accessories, and comes with a battery. Choosing shooting distance (out to 100 yards), mind the light conditions, which can influence the accuracy results.

Pros:
  • Ready to operate as once after the installation of the barrel band;
  • Easily regulates for elevation and windage;
  • Good for low light or night time shooting;
  • 5-year warranty;
  • The run time is about two hours;
  • Easy to install and access to on/off switch;
  • Bright laser beam to simplify target point location and line up the aim.
Cons:
  • Does not fit properly on the wood stock classic 10/22 carbine (about a 1/4 inch gap);
  • Adjustments must be made with a tiny Allen wrench, which is easy to lose;
  • Battery installation instructions are incorrect.

#5 Nodak Spud LLC RUGER 10/22 Adjustable Front Sight

Nodak Spud LLC RUGER 10/22 Adjustable Front Sight

Nodak spud sight operates with standard 10/22 barrels, allowing them to have almost identical sight images to military-type rifles one (the AR-15/M16). The Nodak designed the front sight to ensure quick laser bore sight and alignment spot-on, without moving on the barrel. Leveling the rifle and the front sight is quick to the top dead center. Under the instructions, two mounting screws should not over-torque, as their polymer tips could be crushed (10 inch-pounds is enough). These sights are used with Ruger 10/22 Rear Sight with Rail; with SKS post, mounted with two 10-32 nylon, tipped set screws. The aluminum sights can be put on a variety of receivers. The elevation adjustment needs a SKS/AK-style sight setting tool.

Pros:
  • Made in the USA;
  • Fit and finish are excellent;
  • Aesthetically pleasing design;
  • Easy to install;
  • Durable;
  • Wide range of adjustment for elevation.
Cons:
  • None yet.

#6 Hiviz LITEWAVE  Sight for Ruger 10/22

Hiviz LITEWAVE Interchangeable Front and Rear Sight Combo for Ruger 10/22

View on BassPro View on Cabelas View on Optics Planet

Hiviz sights are crafted from an advanced, diagonal-wave exoskeleton carbon steel frame to protect the Litepipe from damage, providing light gathering from all angles. The Hiviz designed a bright 3-point sight system to improve the sight acquisition on Ruger 10/22 in daylight, and even in dim light. There are 3 interchangeable LitePipes: red, green, and white, coming with a changing key for Front and Rear Sights. The rear sight elevation adjusts in green. The interchangeable front sight with six .080 diameter LitePipes regulates in various colors. LITEWAVE Front and Rear Sight fits standard rifles Ruger 10/22 with 18.5″ barrel, carbine, and takedown models.

Pros:
  • Solid construction;
  • Equipped with 3 interchangeable LitePipes;
  • Much easier to see than on the factory sight set.
Cons:
  • Doesn’t collect light properly;
  • Runs out of the elevation.

#7 TruGlo Ruger 10/22 Rifle Sight

TruGlo Ruger 10/22 Rifle Sight

Fiber Optic Sights, with better aiming pictures, are designed by TruGlo to place on the Ruger 10/22 instead of the existing factory ones. If you have a take-down model, this Ruger sight will not fit properly, as it is suitable for the dovetail slot, but it can cover the barrel lug and interfere with the gun takedown. The CNC machined double Sight with .060″ front and .035″ rear diameters has red and green colors correspondingly to deliver fast target acquisition, which is suitable for plinking and hunting.

Pros:
  • Good visibility;
  • Full adjustments of windage and elevation;
  • Pick up the aim quickly and constantly.
Cons:
  • Does not fit carbine barrels;
  • Very tight, does not tap into place;
  • Hard to install: back mounts are not set up to fix properly;
  • California’s Proposition 65;
  • Not durable materials: front sight can break while installing;
  • Not easy to adjust for windage.

#8 Tandemkross Shadow Sight Mount Ruger 10/22

TANDEMKROSS Shadow Sight Mount Ruger 10/22

This Shadow sight mount is equipped with all needed hardware such as dowel pins, gaskets, and screws. Having a unique screw pattern, it mounts easily on the 10/22 rifle in any position rear or front. Due to the upgraded design, this mount can fit many optics and place directly to the 10/22 receiver without a clamp and Picatinny base. The manufacturer recommended before choosing the mount, check with your optics compatibility in the chart.

Pros:
  • Reduces the overall height;
  • Compatible with many various optics;
  • Reversible mounting positions: both forward and rear are possible for custom optic layout;
  • Picatinny rail and clamp are not necessary: it mounts straight to the 10/22 receiver.
Cons:
  • Not rated yet.

#9 Ruger 10/22 Standard Open Rear Sight

Ruger 10/22 Standard Open Rear Sight

This rear sight is designed for Ruger 10/22 rifles and comes with two screws on the front. After installing the sight by drifting it into the dovetail, it is needed to check if it is centered (how it shoots: to the left or right of the aimpoint). Having an error, drift the sight in the dovetail to center it. To adjust elevation, it’s necessary to loosen two tiny slotted screws on either side of the white diamond and regulate up or down for the needed distance to sight in at.

Pros:
  • Goes right on and fits tight;
  • Common dovetail size;
  • The folding rear sight has adjustable elevation.
Cons:
  • Very fragile: the elevation screws are easily broken;
  • The dovetail on the sight is too slim, it slides through the slot in the receiver without any friction;
  • Hard to install: have to hit severe to get it to slide into the tapered dovetail centered.

#10 KNS Precision Ruger 10/22 .425 Iron Gun Sights

KNS Precision Ruger 10/22 .425 Iron Gun Sights

KNS offers 6 models of Gun Sights with Standard or Duplex Crosshair, and 3 available sizes 0.425, 0.525, 0.625. Ruger 10/22 Gun Sights are manufactured from heat-treated iron by using durable and effective components. This Precision Sights have a .240 aperture body style for standard crosshair type (with .010 diameter size).

Pros:
  • Six available models;
  • Hard-duty components;
  • Designed especially for Ruger 10/22 rifles.
Cons:
  • Not rated yet.

#11 XS Sight Systems – Ruger Mini-30 Rear Sight

XS Sight Systems - Ruger Mini-30 Rear Sight

XS SIGHT SYSTEMS developed open aperture sights with high accuracy and sighting speed. The Mini-30 Rear Sight is constructed from steel, fully machined with a black finish. This Ghost Ring sight is easily mounted, utilizing the rear scope base holes on many popular rifles, and regulated with dual set screws.

Pros:
  • Adjustable bases with windage and elevation;
  • Made in the USA;
  • Easy to install;
  • Fits quickly due to pre-machined;
  • All steel construction;
  • Fast sight for brush hunting applications.
Cons:
  • None yet.

#12 Tech Sights – Ruger 10/22 TSR200

Tech Sights - Ruger 10/22 TSR200

These GI-STYLE Sights become a great improvement over the factory buckhorn sights on the 10/22 rifles. The sight allows to zero the rifle easier and faster than with the factory Ruger sights. TECH SIGHTS declares that exchange sight sets deliver a longer sight radius to enhance accuracy with a similar sight picture as an AR-15/M16 sight. Rear sights can be installed, using the factory-provided holes for a scope base without drilling or tapping. The TSR200 rear peep sight is equipped with a single aperture with a rotating dial to adjust elevation properly. All-steel front sight assembly on a standard stopper-locking M16 post, edged by ears, protecting it from misalignment and damage. This iron sight is suitable for a stock or bull barrel 10/22.

Pros:
  • Accurate;
  • Easy to adjust;
  • Lightweight;
  • Tightening screws on both bases side and rear make the sight motionless after mounting into place;
  • Both front and rear sight posts are elevation adjustable to deliver accurate long-distance shooting.
  • Quality construction: both the rear and front sight bases are made of aluminum;
  • Click adjustable for windage.
Cons:
  • The front sight base dovetail is undersized and does not fit in the Ruger factory dovetail, it just slides through;
  • Front sight protective wings are fragile, they bend when it bumps into a firm object.

#Bonus 1: Tacticool22 Threaded Barrel Adapter for Ruger 10/22

Tacticool22 Threaded Barrel Adapter for Ruger 10/22

There are two available models of threaded Barrel Adapter for Ruger 10/22: one black with an oxide finish, the other silver with silver finish. This adapter is equipped with a cutout to put around the front iron sights to fit the Ruger 10/22 models: carbines and takedowns. Threaded Barrel Adapter’s diameter is a bit larger than A2 birdcage-style flash hiders. This adapter is held in place with a set screw, which after tightening is flush.

Pros:
  • MIL-SPEC oxide and stainless finish for years of trouble-free service.
  • Rust-resistant due to high-quality stainless steel;
  • Quickly installed and removed on the non-threaded barrel without need to go to a gunsmith or machinist.
Cons:
  • Not rated yet.

#Bonus 2: Evolution Gun Works Vortex Viper/Venom Sight Mount

Evolution Gun Works Vortex Viper/Venom Sight Mount

Sight Mount is crafted of 7075 aluminum with a matte black hard coating. This mount does not fit Walther PPQ 22 or Q4, TacWalther Q5. To place the plunger on some Walthers models, there is a hole, drilled in the dovetail bottom. If necessary this plunger can be removed from the slide. The installation should be done from the left to the right (with the muzzle facing forward). To replace the rear sight, just take the mount off. After placing the red dot sight on the EGW Sight Mount, it is needed to apply blue Loctite to the supplied mounting screws. The manufacturer warns any firearm modification may annul the warranty, it’s better to make an installation at a competent gunsmith.

Pros:
  • The progressive taper of dovetail makes installation easier;
  • Comes with mounting hardware;
  • Good alternative to slide drilling;
  • Fits on the Sig Sauer P320 X-5: needed actions – file the RMR cut rear side on the slide, use the longer set of screws, (no need in Picatinny rail mount plate), and mount the Venom to the holes in the slide.
Cons:
  • Takes some effort to install.

#Bonus 3: ProMag Archangel 556 Conversion Stock, Ruger 10/22

ProMag Archangel 556 Conversion Stock, Ruger 10/22

The Archangel 556 Conversion Stock for Ruger 10/22 is manufactured of heavy-duty carbon fiber and glass-reinforced black polymer with 4 fast detach hardpoints and extended full-length top Picatinny rail. ProMag designed Conversion Stock similar to an M-4 flat-top carbine, equipped with 2 safe storage compartments. The 6-position folding buttstock adjusts from 10.25in to 14.25in pull length.

Pros:
  • Lifetime Warranty;
  • Ergonomic pistol grip due to the finger grooves;
  • Sides slotted for additional Picatinny rails;
  • Comes with a polyurethane bolt buffer and an extended magazine release;
  • Any barrel contour floats freely, as well as bull barrels up to .920in diameter.
Cons:
  • The buttstock does not slide easily;
  • No access to the storage compartment in the buttstock;
  • No folding stock.

Conclusion

Quality Ruger 10/22 sights are designed to match rifles, exceeding factory sights and other devices, found on high-end precision rifles to satisfy even knowledgeable shooters. Using Ruger 10/22 sights, quick aim acquisition and higher visibility are provided, there will be no issue with getting the rifle to return to zero after field strip cleanings and repeated takedowns, to provide. Apart from the picked sights in the review, experienced shooters pay attention to the Tech-Sight systems that came up with affordable, durable, functional, and precision iron sights for the 10/22 and SKS as well.

Best pick

Williams Gun Sight Ace In The Hole For Ruger. This sight consists of Picatinny scope rail, and it can be used as an integral back-up aperture sight. Fits perfectly on take-down. The rear sight doesn’t interfere with any scopes, having adjustment to get the sights zero in.

Budget pick

Ruger 10/22 Fiber Optic Front/Rear Sight. The rear sight does not extend over the rifle connection point, it is shorter mostly than rear sights with other similar designs. The ambient light is collected and projected by three-dot sights (bright green rear dots and red front ones).

Tags: #Best #Ruger #10/22 #10 22 #Sight #Review #Sights #Front #Iron #Peep #Tech #Takedown #Replacement #Red Dot #Wiliams #Rear #Ghost #Rings #Rails #Tactical #Carabine #Laser #Night #Fire #M1 #Remove

Tatiana Kursakova
Tatiana Kursakova
Professional shooter, traveller, survivalist
My love of guns is in my blood, since childhood I have spent hours enjoying the beauty of guns and adored going through their parts.

Tactical accessories are another passion of mine that I could write about endlessly - my house and garage are full of tactical gadgets, luckily my family shares my interests.

I'm infatuated with traveling that's why work at one place with a daily routine and standard schedule is not for me. I prefer copywriting and English tutoring as a freelancer. I live in a male family among constant talks about cars, guns, hunting, fishing, and, of course, dinosaurs 😊.

My husband is an obsessed hunter, and my two sons are fans of «Demolition Ranch» of YouTube blogger Matt Carriker. They are my best consultants about weapon and all-around ammunition topics. All together we share a love for adventures. Every camping or mounting hiking trip is a "small survival", giving irreplaceable experiences. Nothing can be better than the satisfaction of observing wild nature.

Motto: «Born in Ukraine, made is the USA».

Read more about our team of expert authors.

Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!

About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.

Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments