What is AK 47 Trigger? 💡
This refers to the mechanism responsible for releasing the firing pin and initiating the firing sequence in the AK-47 assault rifle. The AK-47 is a widely known and popular firearm that was designed by Mikhail Kalashnikov in the Soviet Union. Its trigger mechanism is relatively simple and robust, allowing for reliable and rapid firing.
Parts 🔑
| ✅ Trigger 🎯: | The main component is pulled by the shooter’s finger to initiate the firing sequence. |
| ✅ Disconnector 🔗: | A small part that connects the trigger to the hammer. It ensures that the hammer is released only when the trigger is released. |
| ✅ Hammer 🔨: | A component that strikes the firing pin, initiating the firing of the round when released by the trigger. |
| ✅ Sear 🎚️: | This part holds the hammer in a cocked position until the trigger is pulled. When the trigger is pulled, the sear releases the hammer, allowing it to strike the firing pin. |
| ✅ Trigger Return Spring 🧢: | A spring that pushes the trigger back into its original position after it is released, resetting the trigger mechanism for the next shot. |
| ✅ Trigger Guard 🛡️: | A protective housing around the trigger provides support and safety by preventing accidental trigger pulls. |
| ✅ Safety Selector 🔒: | A lever that allows the shooter to select between different firing modes, such as safe, semi-automatic, and automatic. |
| ✅ Pistol Grip 🖐️: | The handle that the shooter holds onto while operating the rifle. It often contains a trigger and provides a comfortable grip. |
| ✅ Trigger Pin 🔩: | A pin that holds the trigger assembly in place, ensuring it remains securely attached to the receiver. |
| ✅ Hammer Spring 🌟: | A spring that provides tension to the hammer, helping it reset after each shot. |
How It Works 💼
- Initial Position 🔒: The trigger is in its resting position, ready to be engaged by the shooter’s finger. The hammer is held back by the sear, preventing it from striking the firing pin.
- Trigger Pull 🎯: The shooter pulls the trigger, exerting pressure on it.
- Trigger Release 🚀: As the shooter continues to pull the trigger, the disconnector engages with the trigger, keeping it connected to the hammer.
- Hammer Release 🔨: When the trigger is fully pulled, the sear is disengaged, releasing the hammer. The hammer moves forward under the pressure of the hammer spring.
- Firing Pin Contact ⚡: The hammer strikes the firing pin, which in turn strikes the primer of the cartridge, initiating the firing sequence.
- Bullet Ignition 💥: The primer ignites the propellant in the cartridge, creating a controlled explosion that propels the bullet out of the barrel.
- Trigger Reset 🔄: After the bullet is fired and the pressure on the trigger is released, the trigger return spring pushes the trigger back to its initial position, resetting the trigger mechanism for the next shot.
Watch this video to find more information💻
Features ⌛
| Single Stage Pull 🎯: They typically have a single-stage pull, meaning that it has a consistent pull weight from start to finish. | Smooth Action 🏹: The trigger mechanism of an AK-47 is known for its smooth action, allowing for easy and precise trigger manipulation. |
| Reliable and Durable 🔧: They are designed to be robust and reliable, capable of enduring harsh conditions and frequent use without compromising performance. | Simplicity 🧩: The trigger system of the AK-47 is relatively simple, consisting of fewer parts compared to some other firearm designs. This simplicity contributes to its reliability and ease of maintenance. |
| Distinctive Trigger Pull 🎚️: The trigger has a distinct feel often referred to as the “Kalashnikov trigger pull,” characterized by a somewhat heavy and slightly gritty sensation. This unique trigger pull is recognizable among AK-47 enthusiasts. | Safety Selector Options 🔒: The AK-47 typically features a safety selector lever that allows the shooter to choose between different firing modes. These can include safe (no firing), semi-automatic (single shot), and automatic (continuous fire). |
Best AK 47 Triggers | Best AK Trigger Reviews
| Image | Product | Brand | |
|---|---|---|---|
 | ALG Defense AK 47/74 Drop-In Trigger | ALG Defense |  |
 | Franklin Armory BFSIII AK-C1 Trigger | Franklin Armory | |
| CMC Triggers AK Tactical 3 Single Stage Trigger | CMC Triggers | |
 | FosTech Outdoors Echo AK-47 Trigger | FosTech | |
 | ALG Defense AK Trigger Ultimate (w/Lightning Bow) | ALG Defense | |
 | Century Arms RAK-1 N-PAP Trigger Group | Century Arms | |
 | CMC Triggers AK Single Stage Trigger Pull | CMC Triggers | |
 | Century Arms RAK-1 Trigger Group | Century Arms | |
 | Fime Group Fime Trigger Group Ak | Fime Group | |
 | Century AK Double Trigger Kit | Century Arms | |
1# ALG Defense AK 47/74 Drop-In Trigger
ALG Defense offers smoother and shorter triggers without springs, fitting gun models AK-47 and AK-74. These Rifle triggers are manufactured from S7 Tool Steel (machined triple alloy) with a manganese phosphate finish in black colour. AK 47/74 triggers are suitable for home defense and combat usage. The single-stage triggers feature drop-in installation and replacement type.
2# Franklin Armory BFSIII AK-C1 Trigger
The BFSIII AK-C1 Trigger is a three-position trigger, where the first is for safety, no fire; the second is for semi-fires (one round per pull); the third is for binary fires (one round on pull and one other on release). The third position delivers the trigger to be the fastest semi-automatic one in the ammunition market, suitable for tactical, competition, and recreational applications. The Binary Firing System GEN 3 (BFSIII) allows canceling the release round just by moving the Patent Pending selector out of Binary mode, holding the trigger back. There are 2 trigger models for calibers: 9mm and 7.62x39mm.
3# CMC Triggers AK Tactical 3 Single Stage Trigger
CMC ensures AK Tactical triggers upgrading will be simple due to fine match grade pull to implement it. It is necessary to install the 3 Single Stage trigger fully self-contained, ready-to-go group, and safety check one.
4# FosTech Outdoors Echo AK-47 Trigger
FosTech developed three modes of operation for Safe Echo semi-automatic triggers, which include AR-II peculiarities to be installed on the AK-47 rifle platforms. These Echo AK-47 black triggers are designed for the common stamped models. These triggers will work well for rifles with a full auto-bolt carrier.
5# ALG Defense AK Trigger Ultimate (w/Lightning Bow)
Single-stage triggers were developed to operate without fitting with most AKs, which have a rivet (not bigger than 0.062 inches tall) for the trigger guard rear, usually acting as an anti-slapp function. A higher rivet, than admitted one, can reduce necessary clearance, and cause the disconnector damage. To avoid trigger slap, it’s necessary to shave down the rivet, not the disconnector tail. ALG Defense recommends a qualified gunsmith to install and make all fire control groups fitting.
6# Century Arms RAK-1 N-PAP Trigger Group
Century Arms designed double hook triggers (with an advanced relief cut), which can replace single hook triggers, being stronger. This single-stage trigger group consists of a disconnector with a spring, a hammer with a spring, a trigger, and a sleeve. The disconnector has passed high round count tests to exclude the slap of the trigger and folding of the engagement surface. Century Arms triggers are compatible with the N-PAP, N-PAP DF, M90 NP, M92 PV, O-PAP, and other Yugo AK rifle and pistol versions.
7# CMC Triggers AK Single Stage Trigger Pull
There are 3 models of CMC Triggers, depending on the trigger shape: AK Style curved, traditionally curved, and tactical flat. These trigger pulls are manufactured from 8620 Alloy Steel (S-7 Tool Steel and 7075-T6 aircraft-grade Aluminum). AK Single Stage trigger with pull, weighing 4.5 lb, is fully self-contained and easy to install. CMC Triggers developed multi-patented designs to ensure a fine match grade trigger pull and its upgrading. CMC Triggers offers a ready-to-go trigger group, after installation, it’s just necessary to check safety before shooting.
8# Century Arms RAK-1 Trigger Group
The RAK-1 Trigger Group OT1727 fits all AK rifles (AK63D, WASR, RAS47, C39, and other AK pistol variants), except for YUGO (Yugoslavian models). This single-stage trigger group comes with a trigger and trigger sleeve, a disconnector, a hammer, and springs to them. Century Arms triggers have a double hook design with an advanced relief cut to be stronger than single hook triggers. The issue of bolt carrier hang-up was minimized due to the optimized top profile hammer, which performs smoother work (even without polishing it).
9# Fime Group Fime Trigger Group Ak
Fime Group declares many years of consistency and long-lasting Trigger Group. This semi-auto trigger is equipped with a hammer, disconnector with spring, stopper, and sleeve. Based on our experience the double-stage mil-spec trigger is fully assembled, having a drop-in construction for AK/RPK-based rifles with stamped or milled receivers. The single-hook triggers were out-crafted from the hardening steel, coated with a protective black oxide. The front side of the disconnector has full contact with the hammer, delivering a secure lockup.
10# Century AK Double Trigger Kit
The double-trigger kit is suitable for AK rifle platforms, allowing a faster rate of fire with better control. Century trigger guard must be constantly modified to handle the extra-length trigger. These tactical replacement triggers are made of steel with a black finish. Century recommends shooters, unfamiliar with AK, use gunsmith assistance while the trigger installation.
#BONUS 1: FAB Defense Tactical Folding Buttstock (AK-47/74)
Tactical Folding Buttstock with embedded regulable cheekpiece has a low and slim profile. These Buttstock are constructed from spring lock on folded position, left folding stock by default, and integrated prompt detach sling swivel connectors on both sides (SLS doesn’t come with a kit). The simple functionality is provided due to quick locking, which is set free by a button push, and opening by a pulling motion and locking.
Installation ⚙️
- Ensure Safety 🔒: Before beginning any installation, ensure the firearm is unloaded and the safety is engaged. Safety should always be a top priority.
- Disassemble the Rifle 🔧: Disassemble the AK-47 by removing the dust cover, recoil spring assembly, and bolt carrier group. This will expose the trigger group for installation.
- Remove Existing Trigger Group 🔄: If there is an existing trigger group in place, remove it by drifting out the trigger and hammer pins. Carefully lift the trigger group out of the receiver.
- Prepare the New Trigger Group 🛠️: Take the new AK-47 trigger group and ensure it is compatible with your specific AK-47 model. Familiarize yourself with its components and check for any included instructions.
- Insert the Trigger Group 🎯: Carefully align the trigger group with the receiver and insert it, ensuring a proper fit. Align the holes in the trigger group with the corresponding holes in the receiver.
- Secure the Trigger Pins 🔩: Insert the trigger and hammer pins through the receiver and trigger group holes, ensuring they pass through both sides of the receiver and the trigger group.
- Function Check ✅: With the trigger group installed, perform a function check. Check the trigger pull, hammer release, and reset to ensure they are functioning properly.
- Reassemble the Rifle 🔄: Once the trigger group is properly installed and functioning correctly, reassemble the AK-47 by putting the bolt carrier group, recoil spring assembly, and dust cover back into place.
- Test Fire with Caution 🔫: With the rifle reassembled, head to a safe and designated shooting range to test fire the AK-47. Observe all safety protocols and guidelines while testing the newly installed trigger.
- Seek Professional Help if Needed 🆘: If you encounter any difficulties during the installation process or if you are unsure about any step, it is advisable to seek the assistance of a qualified gunsmith or professional for guidance.
FAQ ❓
Conclusion 🍀
AK-47 triggers play a crucial role in the functionality, performance, and shooting experience of the iconic rifle. Whether you choose to upgrade, maintain, or customize your trigger, it’s important to consider factors such as your shooting style, purpose, legal requirements, and personal preferences. Upgrading the trigger can enhance performance, provide customization options, and improve shooting accuracy and control. Proper maintenance and care ensure the trigger operates reliably and safely. However, it is crucial to adhere to local laws and regulations regarding firearm modifications and seek professional assistance when needed. Ultimately, choosing the right trigger can enhance your shooting experience and help you make the most out of this legendary firearm. 🤩🛒
Tags: #Best #AK #47 #74 #Trigger #Review #Ultimate Guide #Editor’s choice, #Binary, #Defense, #fostech, #CMC, #AK trigger Franklin Armory, #ALG, #Tapco
See also similar Rotorm’s reviews: Glock Trigger Reviews, AR 15 Trigger Reviews, Remington 700 Trigger Reviews, Binnary Trigger Reviews.
Tactical accessories are another passion of mine that I could write about endlessly - my house and garage are full of tactical gadgets, luckily my family shares my interests.
I'm infatuated with traveling that's why work at one place with a daily routine and standard schedule is not for me. I prefer copywriting and English tutoring as a freelancer. I live in a male family among constant talks about cars, guns, hunting, fishing, and, of course, dinosaurs 😊.
My husband is an obsessed hunter, and my two sons are fans of «Demolition Ranch» of YouTube blogger Matt Carriker. They are my best consultants about weapon and all-around ammunition topics. All together we share a love for adventures. Every camping or mounting hiking trip is a "small survival", giving irreplaceable experiences. Nothing can be better than the satisfaction of observing wild nature.
Motto: «Born in Ukraine, made is the USA».
Read more about our team of expert authors.
Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!
About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.
Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.
Can I install a binary trigger on my AK-47?
🚨 Binary triggers, which offer semi-automatic and binary firing modes, may be available for some AK-47 models. However, it is essential to check the compatibility with your specific AK-47 and adhere to any legal restrictions in your jurisdiction.
If you are planning to buy a binary trigger, consider purchasing a binary boogie hook as it is less expensive than the Franklin or Fostech triggers.
Excellent article, thank you! Clear, good information
Thank you for your feedback👍
Hello. Can I switch between semi-automatic and automatic fire with an AK-47 trigger upgrade?
💡 Upgrading the trigger alone does not enable automatic fire on semi-automatic AK-47 rifles. The fire control group, including the sear and safety selector, would need to be modified to allow automatic fire, which is subject to legal restrictions in many jurisdictions.
Hello,
I wanted to share that I upgraded my AR15 with a Geiselle S3G trigger assembly which has a short reset time and incredible speed. Highly recommend it!
Can you please confirm if there is a similar product available for the AK47 rifle?
Although some may have different opinions, I find the RSA trigger to be the most superior one I have used so far. It is highly customizable, and my personal experience with it has shown no problems with reliability. In particular, I have set it for a 2-stage pull, with a 2nd stage measuring 2.8 lbs, along with a JTE hammer spring, and have been able to eliminate all overtravel. Though some individuals have expressed reluctance towards using the JTE spring, my personal experience has shown no issues with reliability.
I find it interesting. All the information that I have come across suggests that switching to the G2 trigger is an effective solution for curing trigger slap caused by Century triggers.