FAQ – Questions & AnswersCategory: Gun Sights FAQHow to laser bore sight a rifle?
Rick Drake asked 1 year ago
Can i to laser bore sight a rifle?

4 Answers
Olson answered 1 year ago

First, find the bore of your barrel. This can usually be done by looking down the barrel and locating the lands (the raised areas that make up the rifling in the barrel). Measurement or estimation of distances between landmarks on the barrel can also be used to get a diameter measurement.

Next, determine which laser bore sight model you will need. There are many different models available, so make sure you get the one that is compatible with your rifle’s caliber.

How to laser bore sight a rifle?

Once you have both pieces of information, use a few simple steps to properly laser bore sight your rifle:

  1. remove gun magazines and empty chamber
  2. insert laser bore sight into the chamber
  3. close action and tighten screws until snug against the breech face
  4. look through optical sights and align crosshairs with the target
  5. make any necessary adjustments to windage and elevation screws until the laser dot is in the center of your crosshairs
  6. remove the laser bore sight from the chamber
  7. load the gun and take a few practice shots, adjusting as needed
  8. when satisfied, remove the gun from the target stand or shooting bag

And that’s it! You’ve now successfully laser-bore sighted your rifle and are ready to take on targets at the range.

See also:

Lewis answered 1 year ago

Bore sighting is a process of aligning the sights of a firearm with the barrel.

Several methods can be used to bore sight a rifle:

  • One common method is to use a laser bore sight. A laser bore sight emits a beam of light that can be used to align the sights of a firearm with the barrel.
  • Another common method is to use an optical bore sight. An optical bore sight consists of three parts: A barrel sleeve, an objective lens, and an eyepiece. The barrel sleeve fits over the barrel of the firearm and the objective lens fits into the muzzle end of the barrel sleeve. The eyepiece is used to look through the objective lens and align the sights of the firearm with the barrel.

Once the sights of the firearm are aligned with the barrel, the firearm can be fired at a target to confirm that the alignment is correct. If the alignment is not correct, the sights can be adjusted and the process can be repeated until the alignment is correct.

How to laser bore sight a rifle?

Jordan answered 1 year ago

There are a few ways to laser bore sight a rifle:

1. One way is to use the chamber flag method. With this method, you will need to remove the bolt from your rifle and insert a chamber flag into the barrel of the gun. Make sure that the flag is inserted into the barrel and that it is sitting flush against the barrel. Point the red dot of your laser bore sight at the flag and activate the laser. The beam of light should be visible through the barrel of the gun. If not, adjust the sight until you can see it.

Once you have aligned your sights, remove the chamber flag and reattach the bolt to your rifle. Aiming should now be much more accurate.

How to laser bore sight a rifle?

2. Another way to bore sight a rifle is to use a target. Place the target at least 25 yards away from you. Sight in on the target using your scope or iron sights. Once you have the target in your sights, activate the laser bore sight and align the beam of light with the crosshairs of your scope or sights. Remove the laser bore sight and fire a few shots at the target. You should now be able to adjust your sights more accurately for better aim.

If you are still having trouble sighting your rifle, it is always a good idea to consult with a professional gunsmith or someone who is experienced with bore-sighting rifles. They will be able to help you make the necessary adjustments to get your rifle sighted in correctly.

See also:

We have also selected for you Best Optics for your gun

Ivan answered 1 year ago

One way is to remove the bolt and insert the laser into the barrel of the gun.

You then align the laser with the target and tighten it down.

Another way is to use a collimator, which is inserted into the chamber of the barrel.

The collimator has a small hole in it that you line up with the target. Some adapters can be attached to rifles that allow for bore sighting with a laser pointer or even an iPhone.

Whichever method you choose, make sure you practice at home before heading out to hunt or shoot targets. You’ll want to be confident in your ability to properly align your sights before aiming for something important.

How to laser bore sight a rifle?