• Reading time:28 mins read
  • Post category:AK-47 / Muzzle Brakes
  • Post last modified:April 6, 2024
  • Post published:February 28, 2021

Best AK Muzzle Brake - Editor's Choice

What is AK Muzzle Brake? 🚨

It is a device attached to the end of the barrel of an AK-47 or AK-74 rifle to help mitigate the recoil and muzzle rise produced when firing the weapon. It is designed to redirect and disperse the gases expelled from the muzzle, thereby reducing the upward movement of the rifle and improving overall stability during rapid fire.

Our Top Pick
Precision Armament M4-72 Severe-Duty AK Compensator
We have 5 models available, each designed for either AK-47, AR-15, or AR-10 and available in either Matte Black or Matte Stainless color. The M4-72 Severe-Duty Compensator is a high-performance option that can reduce felt recoil by up to 75%. It features a compact and sturdy closed-bottom construction with triple baffle reverse venting technology.
Buy Now On OpticsPlanet
If you click this link and make a purchase, we earn a commission at no additional cost to you.

How does It work? 🔋

💨 When a bullet is fired, high-pressure gases are created behind it. These gases push the bullet down the barrel and propel it forward.

🔃 The muzzle brake is designed with various openings, ports, or baffles. These features are strategically positioned to redirect the gases in specific directions. Normally, when firing an AK rifle, the gases push the muzzle of the gun upward (muzzle rise) due to the recoil forces generated.

🔄 The muzzle brake, by redirecting the gases in different directions, creates a counteracting force to the upward movement. This helps reduce the muzzle rise and keeps the rifle more stable during rapid fire. As a result, the shooter experiences reduced recoil and better control over the weapon, allowing for quicker follow-up shots and increased accuracy.

Watch this video to find more information 💻

Features 🧲

🔄 Recoil Reduction: The muzzle brake effectively reduces recoil by redirecting gases, helping to keep the rifle stable during rapid fire.
🔃 Muzzle Rise Mitigation: By redirecting gases in different directions, the muzzle brake minimizes the upward movement of the muzzle, improving overall control and accuracy.
💥 Improved Stability: The brake enhances the stability of the AK rifle, allowing for more controlled and precise shooting.
🎯 Enhanced Accuracy: Reduced recoil and muzzle rise contribute to improved accuracy, enabling shooters to maintain a better target focus.
🔊 Reduced Muzzle Flash: Some muzzle brakes incorporate features to minimize muzzle flash, reducing the shooter’s visibility signature.
🛠️ Easy Installation: Many muzzle brakes are designed for easy installation on AK rifles, requiring minimal tools or gunsmithing expertise.
💪 Durable Construction: Muzzle brakes are typically made from robust materials like steel or aluminum, ensuring long-lasting performance.
📏 Compact Design: Muzzle brakes are often compact and lightweight, adding minimal weight or length to the rifle.

Advantages 🔥

🎯 Improved Accuracy: The muzzle brake reduces recoil and muzzle rise, allowing for more accurate and controlled shooting. ⬇️ Reduced Recoil: By redirecting gases, the muzzle brake mitigates recoil, making it easier to stay on target and reducing shooter fatigue.
🔃 Enhanced Stability: Muzzle brakes help stabilize the rifle, providing a more stable shooting platform and better follow-up shot capability. 🔄 Better Control: The muzzle brake aids in managing muzzle climb, improving overall control and making it easier to stay on target during rapid fire.
⏱️ Faster Follow-Up Shots: With reduced recoil and muzzle rise, shooters can quickly realign their sights for faster follow-up shots, increasing their shooting speed. 💥 Increased Shooting Comfort: By reducing recoil, the muzzle brake helps make shooting more comfortable, especially during prolonged shooting sessions.
🔊 Decreased Muzzle Rise: The brake minimizes upward movement of the muzzle, keeping the rifle level and preventing loss of sight picture.

 

AK Muzzle Brake Review | Best AK 47 Muzzle Brake

ImageProductBrand
Strike Industries JCOMP V2 Barrel AK Muzzle BrakeStrike IndustriesBUY
Precision Armament M4-72 Severe-Duty AK CompensatorPrecision ArmamentBUY
VG6 Precision Epsilon AK Muzzle BrakeVG6 PrecisionBUY
SureFire 3-Prong Flash Hider with Suppressor AdapterSureFireBUY
Spikes Tactical AK 7.62mm Dynacomp AK Muzzle BrakeSpikes TacticalBUY
SLR SR47 AK Muzzle BrakeSLRBUY
NcSTAR AK-47/74 Muzzle BrakeNcSTARBUY
SGM Tactical VEPR/AK-47 7.62/.308 Rifle Muzzle BrakeSGM TacticalBUY
DoubleStar Carlson Mini Comp AK Muzzle BrakeDoubleStarBUY
Century Arms AK Muzzle BrakeCentury ArmsBUY
VG6 Precision Episilon AK Muzzle BrakeVG6 PrecisionBUY
DoubleStar Carlson Nitro Flash Enhancer for AK47 Muzzle BrakeDoubleStarBUY
SLR SR26 AK Muzzle BrakeSLRBUY

1# Strike Industries JCOMP V2 Barrel AK Muzzle Brake

Strike Industries JCOMP V2 Barrel AK Muzzle Brake

Specification

Threads per Inch: 1/2×28; M14x1 LH
Diameter: 0.87 in
Length: 2.55 in
Weight: 3.6 oz

JCOMP-V2 compensators are appropriate for AK-47 and AR pistols, being good at competitions, small game hunting, or any range, where it is principal to keep the target in the sights. Strike Industries offers a hybrid muzzle brake for significant reduction of muzzle flash and rise.

Video review

Pros:
  • The better recoil control due to the two-chamber design ensures faster follow-up shots;
  • Relatively heavy;
  • Compatible with SI Oppressor;
  • AK Detent Notch;
  • Affordable price;
  • Noticeable recoil mitigation and low concussion;
  • Stylish design;
  • Easy to install.
Cons:
  • A bit loud;
  • No suppressor QD version;
  • Directs muzzle blast towards the shooter.

 

2# Precision Armament M4-72 Severe-Duty AK Compensator

Precision Armament M4-72 Severe-Duty AK Compensator

Specification

Caliber: 7.62x39mm
Threads per Inch: M14x1 LH
Gun Model: AK-47
Length: 2.275 in
Weight: 3 oz

There are 5 available models, fitted for AK-47, AR-15, and AR-10 with Matte Black or Matte Stainless color. M4-72 Severe-Duty Compensator features compact and rigid closed-bottom construction with cutting-edge reverse venting triple baffle to minimize felt recoil (up to 75% reduction). The muzzle devices are crafted from precision-machined heat-treated stainless steel (HTSR 416 – SS bar, HRC 26-32). A proper fitment Accu-Washer muzzle alignment system is needed, which doesn’t come with the compensator.

Video review

Pros:
  • Upward biased venting;
  • Easy fitment;
  • Excludes dust signature and muzzle rise;
  • Lightweight and solid;
  • Withstands high temperature of combat conditions;
  • Long-lasting erosion-resistant finish.
Cons:
  • California’s Proposition 65;
  • Blowback makes gun louder for bystanders;
  • The blast zone is huge.

 

3# VG6 Precision Epsilon AK Muzzle Brake

VG6 Precision Epsilon AK Muzzle Brake

Specification

Caliber: 7.62x39mm
Gun Model: AK-47
Length: 2.21 in
Weight: 2.24 oz

The VG6 Precision manufactured a combination of a muzzle brake, compensator, and flash hider from heat-treated Stainless Steel (17-4ph) with a Black Nitride finish. The VG6 Epsilon AK features are almost similar to the Gamma muzzle brakes line. Based on our experience the main difference is in the port, located on the compensator bottom, where 6 valve holes allow the quickest propelled gasses, getting the second chamber, to come out. Such peculiarity delivers recoil with soft low energy, letting its complete management. The AK47 muzzle device includes an indexing pin slot for standard retention.

Video review

Pros:
  • Unrestrained view through sights or optics thanks to the extended flash hiding prongs;
  • Significant recoil mitigation and muzzle control;
  • Install easily;
  • Low flash signature.
Cons:
  • Muzzle goes down while shooting.

 

4# SureFire 3-Prong Flash Hider with Suppressor Adapter

SureFire 3-Prong Flash Hider with Suppressor Adapter

Specification

Caliber: 7.62x51mm NATO
Threads per Inch: M14x1 LH
Gun Model: AK-74, M14
Length: 2.79 in

Patent-pending designed flash hider is outfitted with a rear labyrinth seal, which diminishes carbon buildup in the indexing system and makes suppressor removal easier after the long shooting. SureFire 3-Prong flash hider features multiple bearing surfaces, delivering superb suppressor alignment, preventing the audible tines from ringing inside the suppressor. This device is manufactured from US mill-certified heat-treated precision-machined stainless steel bar stock with a matte black Ionbond DLC coating. Apart from AK47, there are compensator models, compatible with Heckler & Koch: G36 Compact, G36, HK417, MP7; M14, M16; Steyr AUG, Armalite AR-10, DPMS LR-308, Herstal: FN MK46, FN FAL; Knight Rifles SR-25; M240 Machine Gun; Browning.

Pros:
  • SureFires No-Hassle Guarantee;
  • The capability of proper operation under severe environmental conditions due to durable protective materials;
  • No need for constant modifications while mounting to most 7.62-mm rifles with muzzle threads (5/8-24);
  • No pinging;
  • Easy cleaning, even after abuse use;
  • Reduce flash signature;
  • Labyrinth seals, which reduce gas leaks from the suppressor lock rings, and high-precision single-point cut barrel threads with suitable interfaces provide good performance.
Cons:
  • A little steep;
  • California’s Proposition 65.

 

5# Spikes Tactical AK 7.62mm Dynacomp AK Muzzle Brake

Spikes Tactical AK 7.62mm Dynacomp AK Muzzle Brake

Specification

Caliber: 7.62x39mm
Threads per Inch: M14x1 LH
Weight: 2.7 oz

The Spikes Tactical designed muzzle brake, features 360-degree brake slots covering. This muzzle device is crafted from heat-treated Stainless Steel (416), covered with Black Nitride. While mounting, the index notch allows for due timing. There are three models of Dynacomp muzzle brake, varying with weight and threads, compatible with 7.62×39 or .308.

Pros:
  • Stylish design;
  • Durable material;
  • Convenient installation due to the index notch.
Cons:
  • None yet.

 

6# SLR SR47 AK Muzzle Brake

SLR SR47 AK Muzzle Brake

Specification

Caliber: 7.62x39mm
Thread per Inch: 14×1 LH
Weight: 1.5 oz
Length: 1.2 inch

SLR SR47 Muzzle Brake features a single-port design with a 1.2-inch overall short length and a sturdy small case. This AK Series muzzle device is manufactured from 4140 Steel with a melonite QPQ finish. While installation, dual indexing points allow easier timing. AK74-compatible construction is outfitted with a due port and bore size to ensure good performance.

Pros:
  • Simple fitment due to the dual indexing points;
  • Full elimination of muzzle climb;
  • Correct bore size and slot deliver high efficiency for 7.62 Ammunition;
  • Lightweight;
  • Efficient at reducing recoil;
  • Lots of flashes.
Cons:
  • None yet.

 

7# NcSTAR AK-47/74 Muzzle Brake

NcSTAR AK-47/74 Muzzle Brake

Specification

Caliber: 7.62x39mm
Length: 3.3 inch
Weight: 6.9 oz

NcSTAR developed multi-chamber muzzle brakes, compatible with AKM, AK47, AK74 and 7.62X39, 5.56X45 (.223), and 5.45X39 calibres, to minimize any muzzle rise. This device fits AK74, featuring M24mm X 1.5 RH barrels with detent, it comes with an internal thread adapter for AKM, AK47 threaded barrels (M14mm X 1 LH) with detent. Our research has shown that the multiple chambers and ports on the top and sides are designed to direct expanding gasses upwards, diminishing muzzle climb, at the same time the bottom side is without slots to exclude dust signature which is important while shooting prone. The total weight (6.9 oz) includes an AKM/AK47 M14 X 1 thread adapter.

Pros:
  • Comfort-prone firing: no ports on the muzzle brake downside that prevent dust signature;
  • Patent Pending;
  • Easy installation;
  • Four slots deliver proper fitment on the rifle, while other muzzle devices have only one slot, and it is difficult to line up a slot to pin.
Cons:
  • It looks like a child forged it;
  • The screw is very weak and can strip right after the moment of tightening it down;
  • Lack of instructions for a two-piece muzzle brake.

 

8# SGM Tactical VEPR/AK-47 7.62/.308 Rifle Muzzle Brake

SGM Tactical VEPR/AK-47 7.62/.308 Rifle Muzzle Brake

Specification

Caliber: 30mm Caliber
Thread per Inch: 14×1 LH
Weight: 6.3 oz

The SGM Tactical constructed a two-piece conical muzzle brake, which is effective for flash and smoke deflection to the sides. Stable muzzle control and recoil mitigation allow getting back on the target faster. The conical rifle muzzle brake is made of heat-treated steel, with a black oxide finish. To install this muzzle device, the barrel needs to be threaded (14×1). These SGM Tactical muzzle brakes were developed specifically for AK-47 and Vepr rifles, suitable for 7.62×51 NATO (.308), 7.62×39, and 7.62x54R calibers.

Pros:
  • Significantly enhances accuracy;
  • Two-piece construction;
  • Nice design;
  • Durable finish.
Cons:
  • None yet.

 

9# DoubleStar Carlson Mini Comp AK Muzzle Brake

DoubleStar Carlson Mini Comp AK Muzzle Brake

Specification

Length: 1.4 inch
Weight: 1.9 oz
Thread pitch: 1/2 x 28

Carlson Mini Comp Muzzle Brake is designed with solid bottom 5 ports on the top, featuring the same characteristics as the AK47 slant brake. This short muzzle brake is similar in operation and design to the A2 Flash Hider compact version.

Pros:
  • Post-ban Compliant;
  • Short length;
  • Full functionality;
  • Stout, low-profile;
  • Great fitment;
  • Durable finish.
Cons:
  • California’s Proposition 65;
  • Not the easiest to adjust timing.

 

10# Century Arms AK Muzzle Brake

Century Arms AK Muzzle Brake

Specification

Caliber: 7.62x39mm
Thread per Inch: 14×1 LH

The Century constructed muzzle brake with left-hand threaded (14×1), chambered for 7.62×39 caliber. This muzzle device is considered as one part according to sec. 922r compliance. This compensator is crafted from precision-machined steel with a nitride finish.

Pros:
  • Made in the USA;
  • Lightweight, but durable;
  • Significantly reduces felt recoil;
  • Easy installation;
  • Fits secure and tight;
  • Looks stylish;
  • Fast and effective follow-up shots.
Cons:
  • None yet.

 

11# VG6 Precision Episilon AK Muzzle Brake

VG6 Precision Episilon AK Muzzle Brake

Specification

Caliber: 7.62×39 mm
Threads per Inch: M14x1 LH
Length: 2.21 in
Weight: 2.24 oz
Diameter: 0.86 in

VG6 Precision muzzle device is crafted from heat-treated Stainless Steel (17-4ph) with a bead-blasted Stainless-Steel finish. The compensator bottom features six valve ports, allowing the fastest gasses entering the second chamber, to come out. Such peculiarity lets full control of recoil with soft low energy. The AK47 muzzle device standard retention is provided with the indexing pin slot.

Video review

Pros:
  • Sturdy materials;
  • Standard retention due to the indexing pin slot.
Cons:
  • Not yet rated.

 

12# DoubleStar Carlson Nitro Flash Enhancer for AK47 Muzzle Brake

DoubleStar Carlson Nitro Flash Enhancer for AK47 Muzzle Brake

Specification

Thread pitch: 1.4 x 1 LH Metric

The DoubleStar Carlson developed special convex ports to make the gas escape through them at once after shots, forming a large muzzle flash. The Nitro Flash Enhancer for AK47 rifles operates as a compensator too, successfully allotting the extending gases. The DoubleStar Carlson promises movie-like shots with its muzzle brake attached to the Kalashnikov.

Pros:
  • Movie-like shots: AK-47 blast attracts bystanders;
  • Convenient to install.
Cons:
  • California’s Proposition 65;
  • Without a detent notch;
  • Comes with a useless crush washer.

 

13# SLR SR26 AK Muzzle Brake

SLR SR26 AK Muzzle Brake

Specification

Caliber: 7.62x39mm
Threads per Inch: M26x1.5 LH

SLR SR26 Muzzle Brake features a single-port design with sturdy small housing. This AK Series muzzle device is crafted from heat-treated billet Steel (4140) with a melonite heat-treat finish. While installation, dual indexing points allow easier timing. AK74 compatible devices are equipped with the correct port and bore size to deliver good output.

Pros:
  • Efficient at recoil reduction;
  • Easy installation;
  • Complete muzzle rise elimination;
  • Fits all 26mm Gas Blocks with offset index pins and 90-degree;
  • Proper bore size and port provide high performance for 7.62 Ammunition.
Cons:
  • Not yet rated.

 

Installation ⚙️

  1. 🔧 Step 1: Ensure firearm safety by unloading the AK rifle and verifying that the chamber is empty. Always follow proper firearm safety protocols.
  2. 🧰 Step 2: Gather the necessary tools and equipment, which may include a wrench or pliers (depending on the specific muzzle brake design) and any included hardware or adapters.
  3. ⬆️ Step 3: Align the muzzle brake with the AK’s barrel threads, ensuring it is facing the correct direction (the side with ports or baffles should be facing forward).
  4. 🔄 Step 4: Begin threading the muzzle brake onto the barrel by hand, turning it clockwise (righty-tighty). Make sure it engages properly and is aligned straight.
  5. 🛠️ Step 5: Use a wrench or pliers to securely tighten the muzzle brake. Be careful not to over-tighten, as it may damage the muzzle device or barrel.
  6. 🔒 Step 6: Check the alignment of the muzzle brake to ensure it is straight and properly seated. Adjust if necessary.
  7. 📏 Step 7: Measure the overall length of the rifle, including the muzzle brake, to ensure compliance with local laws and regulations.
  8. 🔧 Step 8: If provided, install any additional set screws or locking mechanisms that may be included with the muzzle brake. These can help secure it in place.
  9. 🛡️ Step 9: Verify that the muzzle brake is securely attached and does not move or loosen during handling.
  10. 🔫 Step 10: Perform a final safety check by verifying that the firearm is still unloaded before proceeding to use it.

Please watch this video to learn more information 📺

FAQ ❓

What is the difference between Flash Hider VS Muzzle Brake?

🔥 Flash Hider: A flash hider is a device attached to the muzzle of a firearm to reduce the visible muzzle flash that occurs when a round is fired. It disperses and redirects the hot gases expelled from the barrel to minimize the bright flash, which can be especially helpful in low-light conditions or when using night vision devices. The primary purpose of a flash hider is to conceal the shooter’s position by reducing the muzzle signature. Emojis: 💥🔇

🔃 Muzzle Brake: A muzzle brake, on the other hand, is a device designed to reduce recoil and muzzle rise when firing a firearm. It achieves this by redirecting the gases expelled from the muzzle in specific directions, countering the upward force generated by recoil. The primary function of a muzzle brake is to improve control, stability, and follow-up shot capability. It helps the shooter stay on target and enhances shooting comfort. Emojis: ⬆️🔃

In summary, a flash hider primarily focuses on reducing the visible muzzle flash to preserve the shooter’s concealment, while a muzzle brake primarily focuses on reducing recoil and muzzle rise to enhance control and stability during shooting. It’s important to note that some muzzle devices can have a combination of both flash-hiding and recoil-reducing features, providing a compromise between the two functions.

Watch this video to find more information 💻

How To Clean A Muzzle Brake?
  1. 🛡️ Step 1: Ensure firearm safety by unloading the weapon and verifying that the chamber is empty. Always follow proper firearm safety protocols.
  2. 🧼 Step 2: Prepare a cleaning solution by mixing a mild firearm cleaning solvent or a designated carbon remover with water, following the manufacturer’s instructions.
  3. 🔄 Step 3: Remove the muzzle brake from the firearm. This may require using a wrench or pliers to loosen and unscrew it counterclockwise (lefty-loosey).
  4. 🚿 Step 4: Submerge the muzzle brake in the cleaning solution or apply the solution directly to the brake. Allow it to soak for a few minutes to help loosen carbon buildup and debris.
  5. 🧽 Step 5: Use a soft-bristled brush or a toothbrush to scrub the inside and outside of the muzzle brake, paying attention to the ports, baffles, or any other intricate parts. Gently scrub to remove carbon deposits and residue.
  6. 💦 Step 6: Rinse the muzzle brake thoroughly with clean water to remove any remaining cleaning solution and debris.
  7. 🌬️ Step 7: Use compressed air or a can of compressed air to blow out any water or debris from the muzzle brake’s crevices and holes. Ensure it is completely dry.
  8. 🛡️ Step 8: Inspect the muzzle brake for any stubborn carbon buildup or residue. If needed, repeat the cleaning process or use a specialized carbon cleaner to remove the buildup.
  9. 🔒 Step 9: Reattach the clean and dry muzzle brake to the firearm. Ensure it is properly aligned and securely tightened according to the manufacturer’s recommendations.
  10. 🧽 Step 10: Clean and maintain the rest of the firearm as per the manufacturer’s instructions, ensuring all components are properly cared for.

We believe this video can be helpful for you 📺

How to Time A Muzzle Brake?
  1. 🔧 Step 1: Ensure firearm safety by unloading the weapon and verifying that the chamber is empty. Always follow proper firearm safety protocols.
  2. 🛠️ Step 2: Gather the necessary tools, which may include a wrench, pliers, or a specialized muzzle brake timing tool.
  3. ⬆️ Step 3: Carefully inspect the muzzle brake and the barrel’s threads for any debris, dirt, or obstructions. Ensure they are clean and free of any contaminants.
  4. 🔄 Step 4: Apply a small amount of anti-seize compound or thread-locking compound (if recommended by the manufacturer) to the threads of the barrel. This can help with installation and prevent the muzzle brake from loosening over time.
  5. ⏲️ Step 5: Hand-thread the muzzle brake onto the barrel, ensuring it is aligned in the desired orientation. It’s important to note that muzzle brakes often have specific designs or features that should face a particular direction, such as ports or baffles facing upwards or to the sides.
  6. 🛠️ Step 6: Using a wrench, pliers, or a muzzle brake timing tool, gently tighten the muzzle brake until it is snug against the barrel. Do not over-tighten to avoid damaging the threads or the muzzle brake itself.
  7. 🕰️ Step 7: Check the alignment of the muzzle brake. Ideally, the ports or baffles should be positioned as desired, ensuring that the recoil-reducing and redirecting features work effectively. Adjust the orientation if needed.
  8. 🔀 Step 8: If the muzzle brake is not aligned correctly, loosen it by a quarter-turn or more, then carefully thread it back on while aligning it properly. Repeat this process until the desired orientation is achieved.
  9. 🔒 Step 9: Once the desired alignment is achieved, tighten the muzzle brake securely using the wrench, pliers, or muzzle brake timing tool. Again, avoid over-tightening.
  10. 🛡️ Step 10: Perform a final safety check by verifying that the firearm is unloaded and ensuring the muzzle brake is securely attached and does not move or loosen during handling.

Remember to consult the specific instructions provided by the manufacturer of your muzzle brake and follow any additional recommendations or precautions they may have.

Please watch this video to learn more information 📺

How long can a muzzle brake be?

The length of a muzzle brake can vary depending on its design, purpose, and local regulations. There is no specific standard length for muzzle brakes, as they can come in various sizes and configurations. In many cases, muzzle brakes are designed to be compact and lightweight, adding minimal length to the barrel of the firearm.

It’s important to note that the overall length of a firearm, including the muzzle brake, may be subject to legal restrictions in certain jurisdictions. These restrictions are typically in place to regulate the overall length of firearms to ensure compliance with laws related to barrel length, overall firearm length, or other regulations. Therefore, it’s essential to familiarize yourself with local laws and regulations regarding firearm accessories, including muzzle brakes, to ensure compliance.

Are there any Disadvantages of AR Muzzle Brake?

🔊 Increased Noise: Muzzle brakes can amplify the noise generated when firing a firearm. The redirected gases and increased recoil reduction can result in a louder gunshot, which may be a disadvantage, especially in situations where noise reduction is desired.

💨 Increased Muzzle Blast: Muzzle brakes redirect the expelled gases to reduce recoil, but this redirection can result in an increased muzzle blast. The gases are expelled with greater force and can create a significant blast effect, which might be problematic in close-quarters shooting or for nearby shooters.

⬆️ Increased Perceived Recoil: While muzzle brakes are designed to reduce recoil, they can create a perceived increase in recoil for shooters positioned near the firearm. The redirected gases can create a blast effect that can be felt more prominently by nearby shooters, potentially affecting their shooting experience.

📏 Added Length and Weight: Muzzle brakes, especially those with larger designs, can add length and weight to the front end of the firearm. This may affect the overall balance and maneuverability of the AR rifle, potentially making it less comfortable or less suitable for certain shooting applications.

Conclusion ⌛

AR muzzle brakes are valuable accessories that offer several benefits to shooters. They can effectively reduce recoil, muzzle rise, and enhance shooting control, resulting in improved accuracy, faster follow-up shots, and increased shooting comfort. However, it’s important to consider potential downsides such as increased noise, muzzle blast, and added length and weight. Adhering to local laws and regulations is crucial when using muzzle brakes or any firearm accessory. Ultimately, personal preferences, shooting style, and the specific shooting environment should guide the selection and use of a muzzle brake. 🤩🛒

Tags: #Best #AK #AK 47 #Muzzle #Brake #AK 74 #Tapco #Review #Flash Hider #Lantac #Recoil #Reducing

Tatiana Kursakova
Tatiana Kursakova
Professional shooter, traveller, survivalist
My love of guns is in my blood, since childhood I have spent hours enjoying the beauty of guns and adored going through their parts.

Tactical accessories are another passion of mine that I could write about endlessly - my house and garage are full of tactical gadgets, luckily my family shares my interests.

I'm infatuated with traveling that's why work at one place with a daily routine and standard schedule is not for me. I prefer copywriting and English tutoring as a freelancer. I live in a male family among constant talks about cars, guns, hunting, fishing, and, of course, dinosaurs 😊.

My husband is an obsessed hunter, and my two sons are fans of «Demolition Ranch» of YouTube blogger Matt Carriker. They are my best consultants about weapon and all-around ammunition topics. All together we share a love for adventures. Every camping or mounting hiking trip is a "small survival", giving irreplaceable experiences. Nothing can be better than the satisfaction of observing wild nature.

Motto: «Born in Ukraine, made is the USA».

Read more about our team of expert authors.

Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!

About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.

Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.

0 0 votes
Article Rating
Subscribe
Notify of
guest
10 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
Davis
Davis
8 months ago

I am thinking about wouldn’t a blast shield defeat the purpose of the brake.

    Natalia
    8 months ago
    Reply to  Davis

    🛑 Yes, a blast shield placed directly in front of a muzzle brake can potentially interfere with its intended function. Muzzle brakes are designed to redirect gases and reduce recoil by allowing the expelled gases to escape through ports or baffles. The redirecting of these gases helps counteract muzzle rise and recoil forces.

    📌 When a blast shield is installed in front of the muzzle brake, it can disrupt the flow of gases and interfere with the muzzle brake’s ability to effectively redirect them. The shield may restrict the gases from dispersing properly, which can diminish the brake’s recoil reduction capabilities and potentially impact the firearm’s overall performance.

    ✅ However, it’s worth noting that some muzzle devices, such as muzzle brakes with integrated blast shields or combination devices, are specifically designed to incorporate both functions.

      Merrial
      Merrial
      8 months ago
      Reply to  Davis

      Yes, It would defeat the purpose of the break, but there are some special ones out there that do both; they cost more and they are bigger.

        Sanders
        Sanders
        8 months ago
        Reply to  Davis

        Based on my experience and what I have seen on YouTube, it seems that using a shield defeat product reduces its effectiveness by around 65%. I have tried it once before and had the same experience.

          Veronion
          Veronion
          8 months ago

          Good article. I love to educate myself in different parts of firearms, and what they do

            Natalia
            8 months ago
            Reply to  Veronion

            Thank you for your kind words 👍

              Santiono
              Santiono
              8 months ago

              The AR muzzle brake helped mitigate the muzzle blast and reduced the amount of dust kicked up when shooting in prone positions. It enhanced my shooting experience and made training sessions more enjoyable

                BasketballPlayer
                BasketballPlayer
                8 months ago

                Hello. Can I use a suppressor with an AR muzzle brake?

                  Natalia
                  8 months ago

                  🟡 Some muzzle brakes are designed to be compatible with suppressors, allowing you to mount a suppressor over the muzzle brake. However, it’s crucial to ensure proper compatibility and follow legal requirements and regulations regarding suppressor use in your jurisdiction.

                    Tactical Man
                    Tactical Man
                    8 months ago

                    I was impressed by the AR muzzle brake’s ability to minimize muzzle rise. It allowed me to quickly acquire targets and made shooting drills much more efficient. It’s a great addition to any AR-15 rifle.