How to remove Remington 870 forend?

The Remington 870 is a popular shotgun that’s been used by law enforcement and civilians for years. It’s a reliable firearm that’s known for its durability and ease of use.

To remove the Remington 870 forend, you’ll need to first remove the barrel. There are a few screws that hold it in place. Once the barrel is out, you can unscrew the forend and pull it off. Be careful not to lose any of the parts!

Remington 870 Forend Removal:

1. Begin by removing the barrel. This is done by rotating the barrel retaining nut counterclockwise until it comes off. There is no need to remove the magazine tube or spring.

2. Pull the forend forward and off of the shotgun.

3. To reassemble, reverse these instructions. Be sure to tighten the barrel retaining nut securely to ensure accuracy and safety when shooting your Remington 870 shotgun.

There are a few ways to remove the Remington 870 forend. You can use a screwdriver or Allen wrench to loosen the screws on either side of the forend, or you can pry it off with a screwdriver or putty knife. Be careful not to damage the gun while removing the forend.

For more information watch the video

You can use a screwdriver to remove the forend retainer. You can also use a Remington 870 forend removal tool, which is available for purchase on the internet. Once the retainer is removed, the forend can be slid off of the shotgun.

We also recommend that you watch the video