How to load a Remington 700?

The Remington 700 is a popular hunting rifle that is known for its accuracy. To get the most out of this rifle, it is important to learn how to correctly load it.

Here are some tips on how to do just that:

1. Make sure the gun is unloaded before beginning. This means removing the magazine (if applicable), opening the action, and visually checking the chamber to make sure there is no round present.

2. Choose the appropriate ammunition for your gun. The owner’s manual will have this information, but generally speaking, you will want to use ammunition that is the same caliber as the gun. For example, if you have a .30-06 Remington 700, you would use .30-06 ammunition.

3. Inspect each round of ammunition before loading it into the gun. Look for any damage to the case, bullet, or primer. If you find any, do not use that round of ammo.

4. Load the rounds into the magazine (if applicable). Make sure they are seated correctly and that the magazine is properly inserted into the gun.

5. Chamber a round by pulling back on the bolt handle and releasing it. The round should now be in the chamber and ready to fire.

Repeat these steps until the gun is loaded with the desired number of rounds. Remember to always treat every gun as if it is loaded, even when you know it is not. This will help to prevent accidents.

There are a few things you need to know to load a Remington 700.

• First, you need to make sure that the gun is unloaded.
• Second, you’ll need ammunition– either shells or cartridges.
• Finally, you’ll need something to prop the gun up with so that gravity can help feed the rounds into the chamber.

You’ll want to open the action (the part of the gun that holds the rounds). Make sure that there is nothing in the way of the chamber- no dirt, grime, or moisture. Then, take your ammo and load it into the magazine. While still holding open the action, push forward on ibraryltor the rounds until they click into place. Close the action, and your gun is now loaded!

For more information on loading a Remington 700, check out this video:

The first thing you need to do is check that your Remington 700 is unloaded. To do this, open the action and check that there is no cartridge in the chamber. Then, remove the magazine by pressing the release button located just behind the trigger guard. Once the magazine is out, look into the chamber to make sure there aren’t any rounds left in there.

Next, you’ll need to find the right type of ammunition for your gun. The Remington 700 can chamber a variety of different cartridges, so make sure you’re using the right one for your gun. If you’re not sure, consult the owner’s manual or ask a knowledgeable person at your local gun store.

Once you have the right type of ammo, it’s time to load the magazine. First, find the follower and make sure it’s in the right position. Then, start loading rounds into the magazine. Once you have the desired number of rounds in the magazine, replace the follower and insert the magazine into the gun.

Now that the magazine is loaded, it’s time to chamber a round. To do this, simply pull back on the bolt handle and release it. This will chamber a round and put the gun into a firing position.

I’m going to assume you’re asking how to load a Remington 700 rifle. If so, here are the steps:

1. Make sure the rifle is unloaded. Remove the magazine (if present) and open the action to check that there is no cartridge in the chamber. If there is one, remove it now.

2. Fit a clip into the magazine well, lining up the rounds with the feed lip so that they can enter the chamber smoothly when you close the action.

3. Close the action and cycle it several times to make sure rounds are feeding correctly from the magazine into the chamber. You may need to adjust the tension on the magazine spring if rounds are not feeding correctly.

4. Your rifle is now loaded and ready to fire. Remember to always practice good firearms safety!

If you have any further questions, please feel free to ask in the comments section below or contact a professional firearms instructor.

First, make sure the gun is unloaded and the safety is on.

Then, insert the magazine into the magazine well and push it up until it locks into place.

Next, chamber a round by pulling back on the bolt handle and pushing it forward again.

Finally, take off the safety and you’re ready to shoot.