How to lighten trigger pull on AR-15?

There are a few things you can do to lighten the trigger pull on your AR-15.

• One is to replace the factory trigger with an aftermarket one that is designed to be lighter.
• Another is to adjust the trigger spring tension by turning the adjustment screw on the back of the trigger.
• And finally, you can also lighten the pull weight by filing down or polishing the contact surfaces of the trigger and hammer.

However, it’s important to note that any modification you make to your gun should be done with caution and only by a qualified gunsmith. Improper adjustment or modification could result in accidental discharge and serious injury.

It’s important to realize that reducing the weight of the trigger pull on an AR-15 can make it easier to fire unintentionally, which is why many gun enthusiasts recommend against doing so. With that said, there are a few ways you can lighten the trigger pull on your AR-15 without compromising safety.

1. One way is to install a lighter spring in the firing mechanism.
2. Another is to reduce the tension on the hammer spring.
3. Finally, you can also install a connector that reduces the amount of force needed to pull the trigger.

There are a few ways to lighten the trigger pull on your AR-15:

1. One way is to install a lighter trigger spring.
2. Another way is to install a lighter hammer spring.
3. You can also adjust the trigger pull weight by adjusting the screw that holds the trigger in place.

Be sure to consult with an experienced gunsmith before making any modifications to your AR-15, as doing so incorrectly could result in serious injury or death.

One is to swap out the standard trigger for a lighter one.

You can also adjust the spring tension on the hammer and sear, or add a buffer to the recoil system.

You can take your rifle to a gunsmith who can lighten the pull for you.

One is to use a lighter recoil spring. Another is to use a smaller diameter hammer pin. And finally, you can use a reduced power firing pin spring. All of these modifications will lighten the trigger pull, but they will also decrease the rifle’s reliability and increase the risk of accidental discharge. So if you decide to make any of these modifications, be sure to practice safe gun handling procedures at all times.

One is to install a lighter trigger spring.

Another is to polish the contact surfaces of the trigger and hammer.

https://www.youtube.com/watch?v=iIilEj5nhAk

Finally, you can adjust the weight of the hammer spring.

All of these adjustments should be made with caution, as improper adjustments can result in an accidental discharge. Be sure to consult your gunsmith before making any changes to your AR-15.