How to cerakote a gun barrel?

Cerakote is a type of coating that can be applied to metals, plastics, and composites. It is available in a wide range of colors and can be applied to both internal and external surfaces.

Cerakote is most commonly used in the firearms industry to protect gun barrels from corrosion and wear. It can also be used to improve the appearance of guns and has become increasingly popular as a finish for custom firearms.

Applying Cerakote to a gun barrel is relatively simple, and can be done at home with some basic equipment. The first step is to clean the surface of the barrel with denatured alcohol or another suitable solvent. This will remove any oils or contaminants that could prevent the Cerakote from adhering properly.

Once the barrel is clean, it can be sanded with fine-grit sandpaper to create a rougher surface for the Cerakote to cling to. A primer specifically designed for use with Cerakote can then be applied.

After the primer has had time to dry, the Cerakote can be sprayed on in thin coats, allowing each coat to dry completely before applying the next. Once the final coat of Cerakote has been applied, the barrel can be reassembled and ready for use.

We also recommend that you watch this video on the subject of your question

Cerakote is an extremely durable finish that will protect your gun barrel from corrosion and wear. It is also relatively easy to apply, making it a great option for those looking to improve the appearance of their gun or extend the life of their barrel.

Cerakote is a popular finish for gun barrels, and it can be applied at home with some basic equipment and careful attention to detail.

Here’s how to do it:

1. Begin by cleaning the barrel thoroughly with brake cleaner or another degreaser. This will remove any oil or residue that could interfere with the cerakote adhesion.

2. Next, sand the barrel down using 220-grit sandpaper. This will give the cerakote something to grip onto.

3. Once the barrel is sanded, wipe it down again with a degreaser and then preheat it in an oven at 400 degrees Fahrenheit for 15 minutes. This step is crucial, as it will allow the cerakote to cure properly.

4. Now, apply the cerakote evenly to the barrel using a foam brush or similar applicator. Be sure to follow the manufacturer’s instructions regarding how much to apply and how long to let it cure.

5. Finally, once the cerakote has cured, you can reassemble your gun and enjoy its new look!

To correctly cerakote a gun barrel, the first step is to clean the surface of the barrel thoroughly. Any dirt, oil, or other contaminants will interfere with the adhesion of the cerakote and decrease its durability. Once the surface is clean, you’ll need to apply a thin layer of primer specifically designed for use with ceramic coatings.

Once the primer has cured, it’s time to apply the actual cerakote coating. This can be done with a brush, roller, or spray gun. Again, it’s important to apply a thin and even layer to ensure optimal results. Once the coating has been applied, it will need to cure for 24 hours before being exposed to any wear or tear.

With proper care and cleaning, a cerakoted gun barrel can last for many years without showing signs of wear.

We also recommend watching the video

Cerakote is a type of coating that can be applied to firearms to protect them from corrosion and wear. It is also used to improve the appearance of firearms. Applying cerakote to a gun barrel is not difficult, but it does require some care and attention to detail.

Here are the steps you need to follow to cerakote a gun barrel:

1. Clean the gun barrel with solvent and a microfiber cloth. This will remove any oil or debris that could prevent the cerakote from adhering properly.
2. Mix the cerakote according to the manufacturer’s instructions.
3. Using a small brush, apply the cerakote evenly to the gun barrel.
4. Allow the cerakote to cure for the amount of time specified by the manufacturer.
5. Once the cerakote has cured, you can reassemble your firearm and enjoy its new look and improved protection!