What is the Best Scope Mounts For Remington 700? 🤔
The Remington 700 is a convenient American rifle for shooters, hunters, and law enforcement. This centerfire, bolt-action firearm features a sturdy platform, reliability at any conditions, and compatibility with various specific calibers 300 Blackout, 300 Win Mag, 6.5 Creedmoor, .30-06, 7mm Mag, and .308.
V It comes without iron sights, it needs a scope that won’t restrict the shooter. The optics type and its mounts should be selected to fit the best personal specific needs. Read below the scope mounts review, and make your choice.
Iron sights are a classical way to shoot, but more and more shooters are upgrading their rifles with a scope that allows them to extend the reach and enhance the accuracy of hard-to-place shots. Every scope should be selected a suitable mounting height. The lower the height of the optics mounting, the more accurate the shooting. High mounting results in more force and torque affecting the optic during the recoil, influencing the general scope’s life longevity as well.
Benefits 🔥
✅ Integrating scope mounts with bolt-action rifles can significantly enhance their performance and user experience. One of the primary benefits is the improved accuracy they offer. By providing a stable platform, these mounts ensure that optics remain steady, allowing for consistent shots over varying distances. This stability is particularly crucial for long-range shooting. Additionally, they protect the optics from the recoil, ensuring the longevity of the scope.
✅ They also allow for quicker target acquisition, as the scope can be positioned at the right height and angle for the shooter. This ergonomic advantage means that users can maintain a comfortable posture, reducing fatigue during extended sessions. Lastly, using scope mounts adds versatility, allowing shooters to easily switch between different optics depending on their needs.
Features ⭐
☑️ Scope mounts come with a plethora of features tailored to enhance a rifle’s capabilities. They are typically constructed from high-quality materials like aircraft-grade aluminum or steel, ensuring durability.
☑️ Many of these mounts are designed with a Picatinny or Weaver rail system, offering compatibility with a wide range of optics and accessories. Modern mounts often incorporate anti-cant indicators, assisting in ensuring that the rifle and scope are perfectly level. Some offer quick-detach mechanisms, allowing users to swiftly remove or attach the scope without tools.
☑️ Additionally, many are designed to provide optimal eye relief, ensuring a comfortable viewing experience. The precision machining of these mounts ensures a snug fit, eliminating any wobble that could compromise accuracy.
Guide to Choosing the Best Scope Mounts 📝
🚩 Choosing the right equipment to complement your rifle can make a significant difference in your shooting experience. When it comes to enhancing accuracy and ensuring a stable platform for your optics, the right mounting system is essential.
🚩 Firstly, consider the material of the mount. High-quality materials like aircraft-grade aluminum or steel are preferred due to their durability and resistance to wear and tear. The material not only determines the longevity of the mount but also its weight, which can influence the overall balance and feel of the rifle.
🚩 Compatibility is another crucial factor. Some mounting systems are designed with universal rail systems, such as Picatinny or Weaver, which offer flexibility in terms of the range of optics and accessories they can accommodate. It’s essential to ensure that the chosen mount aligns with the type of optics you intend to use.
🚩 Modern designs often come with added features that can enhance your shooting experience. For instance, anti-cant indicators can be invaluable for those keen on long-range shooting, as they assist in ensuring that the rifle and optics are perfectly level. Quick-detach mechanisms, on the other hand, are beneficial for those who might need to switch between optics rapidly or remove them entirely without the hassle of tools.
🚩 Ergonomics and comfort shouldn’t be overlooked. Some mounts are designed to provide optimal eye relief, ensuring that users can comfortably view the entire field without straining. This feature is particularly important for those who spend extended periods aiming or observing through their optics.
🚩 Lastly, precision in design and manufacturing is vital. A well-machined mount will fit snugly on the rifle, eliminating any wobble or play that could compromise accuracy. It’s always a good idea to read reviews, seek recommendations, and, if possible, test out a mount before finalizing a purchase. This ensures that you invest in a product that not only meets your needs but also enhances your shooting experience.
Scope Mounts For Remington 700 Review | Best Scope Mounts For Remington 700
#1 Leupold Backcountry Remington 2 Piece Mount
It is specifically tailored for the Remington 700, a testament to its precision engineering. This 2-piece mount is 0 MOA, meaning it’s designed for shooting at relatively close to medium distances where bullet drop compensation isn’t as critical. This makes it ideal for hunters and shooters who prioritize quick target acquisition over long-range adjustments.
One of the standout features is its construction from a single piece of 7075-T6 aircraft-grade aluminum. This not only ensures its strength and durability but also guarantees that it remains lightweight, a crucial factor for those who are conscious about the overall weight of their firearm setup. The matte finish adds a touch of elegance and ensures that it doesn’t give off any unwanted reflections that might give away your position during a hunt.
#2 DNZ Remington Riflescope Mounts for Remington 700
Crafted with meticulous attention to detail, it is designed to offer a rock-solid platform for your optics. Made from high-quality materials, it ensures that your scope remains firmly in place, even under the most challenging conditions. This stability is crucial for maintaining accuracy, especially when engaging targets at varying distances.
One of the standout features is its compatibility with the Remington Model 7. The 30mm rings provide ample space for most scopes, ensuring a snug fit without any wobble.
Furthermore, the mount’s design ensures that it sits at the perfect height, allowing for a comfortable and natural cheek weld. This ergonomic design ensures that shooters can maintain a consistent and stable shooting position, which is vital for accuracy. The mount also boasts a sleek and streamlined appearance, adding a touch of elegance to your firearm setup.
#3 Trijicon AccuPoint Remington 700 Long Action 7in
Specifically designed for the Remington 700 Long Action, ensuring a seamless fit and impeccable performance. Constructed from high-strength 4140 steel, it is not only durable but also offers the robustness required for rigorous shooting activities. Its full 7-inch 1913 Picatinny rail design provides ample space for mounting various optics, ensuring versatility and adaptability for different shooting scenarios.
One of the standout features is its ambidextrous design, making it suitable for both right and left-handed shooters. This inclusivity ensures that every shooter, regardless of their dominant hand, can benefit from the precision and stability offered by this product. The 3 Mil-spec Anodized Matte Black finish not only adds to the aesthetic appeal but also provides an added layer of protection against the elements.
Compatibility is a significant factor when choosing a scope base, and Trijicon ensures that this product is compatible with all mil-spec products. This compatibility ensures that shooters can pair this base with a wide range of optics without any compatibility issues. The package includes the rail and five #6-48 mounting screws, ensuring that users have everything they need for a hassle-free installation.
#4 Talley Riflescope Mounts for Remington, Browning, Winchesters and More
Constructed with the utmost attention to detail, it is made from high-grade alloy, ensuring durability and longevity. This material choice ensures that the mount remains lightweight without compromising on strength, a balance that is crucial for maintaining the firearm’s balance and ensuring accurate shots. The mount’s design ensures a seamless fit with the rifle, providing a stable platform for optics and ensuring that they remain in place even under the most demanding conditions.
One of the standout features is its anti-cant indicator. This feature ensures that the rifle remains level, preventing any potential inaccuracies that can arise from a tilted rifle. This level of precision is crucial for long-range shooting, where even the slightest deviation can result in missed shots. The mount also boasts a unique vertical split design, which not only enhances its aesthetic appeal but also ensures a more secure grip on the scope.
The black anodized finish not only adds a touch of elegance but also provides an added layer of protection against corrosion and wear. This finish ensures that the mount retains its pristine appearance even after prolonged use, making it a worthy investment for any shooter.
#5 DNZ Products 215 Tactical Scope Mount
Crafted with meticulous attention to detail, it is made from top-grade aluminum, a material known for its strength and lightweight properties. This ensures that the mount does not add unnecessary weight to the firearm, maintaining its balance and ensuring ease of handling. The design is such that it offers a perfect fit with the rifle, eliminating any potential wobble or movement, which can affect accuracy.
One of the standout features is its height. At 2.15 inches, it provides the shooter with an elevated platform, ensuring a clear line of sight and preventing any potential obstructions. This elevation is particularly beneficial for tactical shooters who often find themselves in dynamic environments where a clear view is crucial.
The black anodized finish not only adds a touch of sophistication but also provides an added layer of protection against the elements. This ensures that it remains free from corrosion and wear, even after prolonged exposure to harsh conditions. The precision machining ensures that it offers a snug fit with the scope, preventing any potential movement and ensuring that the optics remain firmly in place.
#6 Wheeler Engineering 1-PC Rem 700 LA Scope Mount
It is meticulously crafted from 661 aluminum, a material renowned for its strength and lightweight properties. This choice of material ensures that it offers robustness without adding undue weight to the firearm, thus maintaining its balance and ease of handling. It is designed to provide a perfect fit with the rifle, eliminating any potential for wobble or misalignment, which can compromise accuracy.
One of the standout features is its swing-out anti-cant level. This feature ensures that the scope rings are always perfectly aligned every time you install the scope. Such precision is crucial as it eliminates any potential for inaccuracies that can arise from misaligned optics. Moreover, the mount is milled in a manner that prevents any damage to your rifle or its receiver during installation, ensuring that the mounting process is smooth and hassle-free.
It comes with a sleek black anodized finish, which not only adds a touch of sophistication but also offers protection against the elements. This finish ensures that remains resistant to corrosion and wear, even after prolonged exposure to harsh conditions.
How To Instal Scope Mount at Remington 700 ⚙️
✔️ Apart from the rifle, scope with its mounting base (not required on some rifles) and rings, prepare necessary tools: screwdriver, Allen or Torx Wrench, small level, as well as a degreaser, gun oil, and removable thread-locker (not Red Loctite or a permanent one).
✔️ Clean Mounting Surfaces by removing any dirt or grease to provide a full seat of the scope base onto the rifle. You can unscrew the receiver top to degrease each screw hole, using a duly-sized screwdriver not to damage the receiver.
✔️ Secure the rifle in a vise. Place the level on the receiver top and adjust the firearm as necessary.
✔️ Before mounting the base to the Remington 700, add a few drops of gun oil on the contact surfaces to prevent rust from forming between the scope base and receiver. It’s better to put a thread-locker to the screw threads to prevent wiggling loose of the screws because of the recoil over time. Then soft tighten down the base, the screws should not jut or hit the bolt while visually and manually checking the receiver and inside the action.
✔️ Attaching the scope rings: arrange all screws and extra parts, mount the bottom of the rings first, then test-fit the scope before adding the top ones. For the Picatinny base push the rings far forward against the closest rail while tightening the screws to ensure a full seat against the rail, and not move during the recoil. While installation, it’s necessary to put the scope closer to the middle of its windage range, when the rifle is zeroed. Such range provides the scope with the best performance and more correction potential for ammo alteration and wind. Attach the scope into the rings’ bottom set far enough away from the objective bell and the adjustment turrets to have a place to regulate if necessary. After defining good clearance with the rings, put a thread-locker and hand tighten the screws down, without torquing them, as eye relief will be required.
✔️ To avoid seeing the black halo through a rifle scope, set the eye relief duly. Shoulder the rifle with the eyes closed, feeling a comfy spot to rest a cheek on the stock comb, then open eyes, find needed eye relief, and set the right distance. It can be helpful to change a bit of scope ring placement or to get a little more or less wiggle room.
✔️ After setting the eye relief, level the scope: put the level on the center turret, adjust the scope until the reticle is perpendicular and parallel to the bore, and tighten all ring screws. Leveled reticle allows accurate compensation for windage and elevation if needed in the field.
✔️ Then correctly dial in the ocular focus to have a clear image of the scope reticle to prevent eye fatigue because of its incorrect adjustment.
✔️ After getting a clear reticle image, zero in a new scope setup.
FAQ 📚
Conclusion 🏁
The Remington 700 is compatible with many specific calibers, some of which deliver heavy recoil, affecting a low-price scope’s zero and overall accuracy. Correct selection of mounting altitude is also important for general rifle performance.
One-piece bases deliver scope stability, allow keeping on target for long-range shots, and are good for heavy scopes on hard-recoiling rifles, as they can be longer and even cantilevered off the base front. Two-piece scope bases are convenient for extra clearance when loading through the action on a bolt-action rifle even wearing gloves in the field. Due to size scope rings should ensure portability.
There are no trifles in equipping the rifle. If you are a hunter, a simple scope reticle (mil-dot, duplex, or a straightforward BDC (bullet drop compensating) will be appropriate. It’s better to choose reticle types, designed for a certain caliber usage, and facilitate windage adjustments and holdover. 💪
The Best Pick
Leupold Backcountry Remington 2 Piece Mount
Crafted from durable 7075-T6 aluminum, this mount ensures a lightweight yet robust platform for your optic. Whether you’re a dedicated hunter or a precision shooter, this mount delivers the stability and reliability you need for accurate shots every time.
The sleek matte finish seamlessly integrates with your firearm, enhancing its aesthetics. With a 0 MOA configuration, this mount provides the versatility to accommodate various shooting distances and bullet trajectories. Attach your favorite scope to this mount, and take your shooting capabilities to the next level.
Budget Pick
Talley Rifle scope Mounts for Remington
Designed to elevate your precision and accuracy, this high-quality scope mount is a must-have for enthusiasts. Whether you’re a Remington, Browning, Winchester, or Ruger owner, it caters to a wide range of rifles.
The durable design ensures your scope stays securely in place, enhancing your shooting consistency. With easy installation and compatibility with various models, it’s the perfect choice for any shooting adventure.
Tags: scope mount for remington 700, best scope mount for remington 700, best one piece scope mount for remington 700, scope mount for remington 700 sps tactical
Tactical accessories are another passion of mine that I could write about endlessly - my house and garage are full of tactical gadgets, luckily my family shares my interests.
I'm infatuated with traveling that's why work at one place with a daily routine and standard schedule is not for me. I prefer copywriting and English tutoring as a freelancer. I live in a male family among constant talks about cars, guns, hunting, fishing, and, of course, dinosaurs 😊.
My husband is an obsessed hunter, and my two sons are fans of «Demolition Ranch» of YouTube blogger Matt Carriker. They are my best consultants about weapon and all-around ammunition topics. All together we share a love for adventures. Every camping or mounting hiking trip is a "small survival", giving irreplaceable experiences. Nothing can be better than the satisfaction of observing wild nature.
Motto: «Born in Ukraine, made is the USA».
Read more about our team of expert authors.
Affiliate Disclosure: Rotorm.com sometimes gets paid for listings, through sponsors or affiliate programs like Amazon, Optics Planet, Lucky Gunner, Brownells, Cabelas, Rainier Arms, 5.11 Tactical, Bass Pro Shop, etс. Clicking a link helps keep Rotorm.com free, at no extra cost to you!
About the author: Each article on our site is written by experts in survival and tactical equipment, gun enthusiasts, extreme travelers, military, law enforcement and desperate professionals, read about the author at the bottom of the article or visit "About Us" page.
Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect the official policy or position of any agency.
The guide on installing a scope mount was insightful. I followed it and had a smooth experience. However, I’m curious, how often should one check the tightness of the screws to ensure the scope remains stable?
☝️ The frequency with which you should check the tightness of your scope mount screws depends on a few factors, including:
❗ As a general rule of thumb, it is a good idea to check the tightness of your scope mount screws every few hundred rounds. However, if you are concerned about the stability of your scope, you can check them more often.
➡️ Here are some tips for checking the tightness of your scope mount screws:
☝️ If you find that any of the screws are loose, tighten them to the recommended torque. If you are not comfortable tightening the screws yourself, you can take your rifle to a gunsmith.
⚠️ It is also important to note that you should not use Loctite or other thread lockers on your scope mount screws. These products can make it difficult to remove the screws in the future and damage the screws or the scope.
I’ve always prioritized durability when choosing a scope mount. The article’s emphasis on material choice resonates with me. Has anyone tried both aluminum and steel mounts and noticed a significant difference?
🔎 When it comes to choosing a scope mount, both the material and the quality of the manufacturing play significant roles in durability and performance. Aluminum and steel are the two most commonly used materials for scope mounts. Let’s delve into the characteristics of both and share feedback that users often have:
➡️ Aluminum Mounts:
➡️ Steel Mounts:
📊 While both aluminum and steel mounts can offer excellent performance, the choice often comes down to specific use cases and personal preferences. Some shooters prioritize weight savings and go for high-quality aluminum mounts, while others prefer the ruggedness and sheer strength of steel, especially if they aren’t as concerned about adding a bit more weight to their setup.
❗ It’s also worth noting that the quality of the manufacturer and the design of the mount can be more important than the material itself. A poorly designed steel mount might not outperform a well-engineered aluminum one. As always, reading reviews, seeking out expert opinions, and trying different mounts in real-world conditions can be the best way to find the perfect fit for your needs.
The article mentions the importance of lapping for some mounts. I’ve never done this before with my Talley Riflescope Mounts. Should I consider it?
❌ Talley Manufacturing does not recommend lapping their scope mounts, as they are machined to tight tolerances. However, some people do choose to lap their Talley mounts in order to achieve the absolute best accuracy.
👀 Lapping is the process of polishing the inside of the scope rings so that they are perfectly smooth and round. This helps to ensure that the scope is perfectly aligned in the rings and that there is no uneven pressure on the scope tube.
☝️ If you are considering lapping your Talley mounts, there are a few things you should keep in mind:
🏁 Ultimately, the decision of whether or not to lap your Talley mounts is up to you. If you are looking for the absolute best accuracy, then lapping may be a worthwhile investment. However, if you are not concerned about accuracy, then lapping is not necessary.
How does the swing-out anti-cant level in the Wheeler Engineering mount work? Is it easy to use for beginners?
⭕ The swing-out anti-cant level in the Wheeler Engineering mount is a small, circular level that is attached to the scope rings. It is used to ensure that the scope is mounted level on the rifle.
☝️ To use the swing-out anti-cant level, first, make sure that the rifle is level. Then, swing the level out and align the bubble in the center of the level. If the bubble is not in the center, adjust the scope rings until the bubble is centered.
👌 The swing-out anti-cant level is a very easy tool to use, even for beginners. It is a great way to ensure that your scope is mounted level and that you are getting the most accurate shots possible.
➡️ Here are the steps on how to use the swing-out anti-cant level in the Wheeler Engineering mount:
➡️ Here are some tips for using the swing-out anti-cant level:
🔥 The swing-out anti-cant level is a very useful tool for ensuring that your scope is mounted level. It is a great way to improve the accuracy of your shots, even if you are a beginner.
For someone new to shooting, how crucial is the anti-cant indicator feature in a scope mount?
🎯 The anti-cant indicator feature in a scope mount is not absolutely crucial for a beginner shooter. However, it can be a very helpful tool for ensuring that the scope is mounted level, which is essential for accuracy.
❗ When a scope is not mounted level, it can cause the bullet to impact the target at a different point than intended. This is because the scope is not aligned with the bore of the rifle. The amount of error caused by cant can vary depending on the severity of the cant and the distance to the target.
⭕ The anti-cant indicator is a small, circular level that is attached to the scope rings. It is used to ensure that the scope is mounted level on the rifle. To use the anti-cant indicator, first make sure that the rifle is level. Then, align the bubble in the center of the level. If the bubble is not in the center, adjust the scope rings until the bubble is centered.
👌 It is a very easy tool to use, even for beginners. It is a great way to ensure that your scope is mounted level and that you are getting the most accurate shots possible.
⚠️ However, if you are a beginner shooter and you are not concerned about getting the absolute best accuracy, then you can get by without an anti-cant indicator. There are other ways to ensure that your scope is mounted level, such as using a bubble level or a laser level.
I noticed the article mentioned the importance of the material of the mount. How does steel compare to aluminum in terms of durability?
⏳ Steel is generally more durable than aluminum. It is stronger and less likely to flex or deform under recoil. However, steel is also heavier and more expensive than aluminum.
💲 Aluminum is lighter and less expensive than steel. It is also not as strong, but it is still strong enough for most applications. Aluminum is a good choice for rifles that will not be subjected to heavy recoil, such as target rifles or varmint hunting rifles.
👀 If you are looking for the most durable variant, then steel is the better choice. However, if you are looking for a lightweight and affordable mount, then aluminum is the better choice.
➡️ Here are some other factors to consider when choosing material:
😎 Ultimately, the best material for a scope mount depends on your individual needs and requirements.
The Trijicon AccuPoint Remington 700 Long Action 7in has been a game-changer for me. The 7-inch Picatinny rail design offers so much flexibility.
I’ve always been a fan of DNZ mounts. Their attention to detail and the quality of materials they use are top-notch.
The article does a great job highlighting the importance of a good scope mount. I learned this the hard way when I bought a cheap one, and it just couldn’t handle the recoil.
I appreciate the detailed guide on how to install a scope mount. It was very helpful for a newbie like me.